Miele FN 3x402 i AU Operating And Installation Instructions page 7

Table of Contents

Advertisement

Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.
If the connection cable is faulty, it must only be replaced by a
Miele approved service technician to protect the user from danger.
Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).
If moisture gets into electrical components, it could cause a short
circuit. Therefore, do not operate this appliance in areas which are
exposed to moisture.
This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
For safety reasons, this appliance may only be used when it has
been fully installed.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– the mains fuse has been disconnected, or
– the screw-out fuse is removed (in countries where this is
applicable), or
– it is switched off at the wall socket and the plug is withdrawn
from the socket. Do not pull the mains connection cable but the
mains plug to disconnect your appliance from the mains
electricity supply.
Repairs and other work by unqualified persons could be
dangerous. Installation, maintenance work and repairs to electrical
appliances must only be carried out by a Miele approved service
technician.
Warning and Safety instructions
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fns 3x402 i au

Table of Contents