Changing The Volume Of The Alarms And Audible Signals; Adjusting The Display Brightness - Miele KFN 7795 D Operating Instructions Manual

Resetting the network configuration
 Tap .
 Swipe left or right until  is shown in
the middle.
 Tap .
 Swipe right until  is shown in the
middle.
 Tap .
 Tap OK.
All entered settings and values for
Miele@home are reset to the default
settings.
The WiFi connection has been deacti-
vated.  will go out on the status dis-
play.
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration appli-
ance. This will also ensure that a pre-
vious owner is no longer able to ac-
cess the refrigeration appliance.
Selecting additional settings
Changing the volume of the alarms
and audible signals /
You can change the volume of the
alarms and audible signals (e.g., in the
event of a door alarm or a fault mes-
sage). Alternatively, you can switch the
alarms and audible signals off if you
find them annoying.
 Tap .
 Swipe left or right until  is shown in
the middle.
 Tap .
 Swipe left or right until the volume
you want is shown in the middle.
 Confirm the volume you want by tap-
ping on the segment bar.
When the alarms and audible signals
are switched off,  will appear.
Adjusting the display brightness 
You can adjust the display brightness to
the lighting conditions in the room.
 Tap .
 Swipe left or right until  is shown in
the middle.
 Tap .
 Swipe left or right until the brightness
you want is shown in the middle.
 Confirm the brightness you want by
tapping on the segment bar.
55