Further Settings; Temperature Display Brightness - Miele FN 28262 ws Operating And Installation Instructions

Temperature display
brightness
The temperature display brightness can
be adjusted to suit lighting conditions in
the room.
The temperature display brightness can
be adjusted in stages from  0 (lighting
off) to  5 (maximum brightness).
Changing the brightness of the
temperature display
 Touch the SuperFreeze sensor for
approx. 5 seconds.
The MENU symbol will light up
and  will start flashing.
 Keep touching one of the temperature
setting sensors until  appears in the
display.
 Touch the SuperFreeze sensor again.

Further settings

 You can now adjust the brightness of
the temperature display using the
sensors for altering the temperature.
You can chose a level between  
and  .
 Touch the SuperFreeze sensor to
save the setting.
The brightness is now set to this new
value.
 Touch the On/Off sensor to quit
settings mode.
Otherwise the appliance will switch to
normal operation after approximately
5 minutes.
25