GE UR F35 Series Instruction Manual page 388

8.2 CYBERSENTRY
Security Alarm Settings
SETTING NAME DESCRIPTION / DETAILS
Failed A threshold number indicating when an alarm is
Authentications set off to indicate too many failed authentication
attempts
Firmware lock A Boolean value indicating if the device can
receive a firmware upgrade. If Yes and a
firmware upgrade attempt is made, the device
alarm activates. If No the device alarm does not
activate. On each firmware upgrade this setting
goes back to the default.
Settings lock A Boolean value indicating if the device can
accept any settings changes. If Yes and a
settings change attempt is made, the device
alarm activates. If No, the device alarm does not
activate.
b) PASSWORD REQUIREMENTS
See the Password Requirements section earlier.
c) USER ROLES
CyberSentry user roles (Administrator, Engineer, Operator, Supervisor, Observer) limit the levels of access to various UR
device functions. This means the EnerVista software allows for access to functionality based on the user's logged in role.
Example: Observer cannot write any settings. The Observer role displays as "None" on the front panel.
The table lists the roles that are supported and their corresponding capabilities.
Table 8–3: PERMISSIONS BY USER ROLE FOR CYBERSENTRY
Roles
UR Setup Software Tree Menu
Settings
|------------ Product Setup
|--------------- Security (CyberSentry)
|--------------- Supervisory
|--------------- Display Properties
|---------------
|--------------- Communications
|--------------- Modbus user map
|--------------- Real Time Clock
8
|--------------- Oscillography
|--------------- Data Logger
|--------------- Demand
|---------------
|---------------
|--------------- Control Pushbuttons
|---------------
|--------------- Flex states
|---------------
|--------------- Direct I/O
8-8
Administrator
Complete Access
RW
see table notes
RW
Clear relay records
(settings) RW
RW
RW
RW
RW
RW
RW
User Programmable
LEDs RW
User Programmable
self test RW
RW
User programmable
Pushbuttons RW
RW
User definable dis-
plays RW
RW
F35 Multiple Feeder Protection System
MIN MAX DEFAULT UNITS
0 99 3
(disabled)
No Yes Yes
No Yes Yes
Engineer Operator
Complete access Command
except for Menu
CyberSentry
Security
R R
R R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
RW R
8 SECURITY
MINIMUM
PERMISSIONS
- Administrator
- Administrator
- Supervisor
(Administrator if
Supervisor has
been disabled)
Supervisor Observer
Authorizes This role is active
writing by default
R R
see table notes R
R R
R R
R R
R R
R R
R R
R R
R R
R R
R R
R R
R R
R R
R R
R R
GE Multilin