Electrical Connection - Kranzle W 11/135 Operating Manual

Electrical connection

The machine is supplied with an electrical power cord with plug.
The mains plug must be fitted to a standard grounded socket with a
30mA residual current operated device.
The socket must be protected with a 16A delay action fuse on the
mains side.
When using an extension cable, this must have an earthed lead which
is properly connected to the socket. The conductors in the extension
cable must have a minimum cross section of 1.5 mm². Plug connec-
tions must be of a spray-proof design, and may not be located on a
wet floor.
(with extension cables of more than 10 m - 2.5 mm
CAUTION !
The use of extension cables which are too long may lead to malfunctions and
start up difficulty.
6
Description
)
2