Table of Contents
Advertisement
for KRÄNZLE - High Pressure Cleaners
Regular inspection every 12 months if used professionally!
Appliance No:
The following must be checked:
1. Safety features
a) Manometer
b) Safety valve (pressure control)
c) Operating pressure
d) Cut out pressure
operating pressure)
e) Low pressure with trigger released
The information in the operating instructions are a part of the inspection
Result of inspection:
Excerpt from the Guidelines for Liquid Spray Equipment (ZH 1/46) by the Central Office of the Professional
Trade Association.
Inspection:
Liquid spray equipment should be inspected for safe operation by a qualified person whenever necessary,
but no less than every 12 months. The maker's or supplier's instructions must be followed. The inspection
intervals may be extended if the equipment is not in active use.
In Germany, inspections compliant with the (German) Emission Controls Act may be required for oil and
gas-fired equipment, and the owner must arrange for these to be carried out independently of the main
inspection.
The results of inspections must be recorded in writing and presented to the respective authorities on
demand. There is no set form for these records.
30
Inspection report
(max. 10% above
Date of inspection:
Type:
2. General condition
a) High pressure hose
b) Cable, plug, switch
c) Spray gun
d) Motor
e) Oil level
(VDE)
Faults rectified,
Stamp and signature
Advertisement
Table of Contents
