Sagem myX-5 Technical Documentation Manual page 70

REMOVING / REPLACING THE KNOB Proc Sheet 0 05
LOCK AND THE LOCKER
myX-3 & myX-5 1/2
4.26 Tools :
- Not applicable
4.27 Preliminary operation
33. Remove the back cover ( Proc sheet 0 01).
4.28 Removal procedure :
1. Push the knob lock (1) upward .
2. Pull out the knob lock (1).
3. In the internal cover side ,slide the locker (3) upward, while lifting it.
4.29 Placement procedure :
1. Place the knob lock (3) in its housing, then slide it downward.
2. Turn the rear cover upside down and et press the knob lock firmly.
4.30 Further operations :
1. Replace the back cover (Proc sheet 0 01).
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002 Page 5-12