Sagem myX-5 Technical Documentation Manual page 68

REMOVING / REPLACING THE ELASTOMER Proc Sheet 0 04
KEYPAD
myX-3 & myX-5 1/2
4.21 Tools :
- Not applicable
4.22 Preliminary operation
1. Remove the back cover ( Proc sheet 0 01).
2. Remove the front cover ( Proc sheet 0 03).
4.23 Removal procedure :
1. Remove the elastomer keypad (2) from the front cover (1).
4.24 Placement procedure :
1. Clean the elastomer keypad (2) with compressed air.
2. Place the elastomer keypad (2) in position in its housing
4.25 Further operations :
1. Replace the front cover (Proc sheet 0 03).
2. Replace the back cover (Proc sheet 0 01).
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002 Page 5-10