Sagem myX-5 Technical Documentation Manual page 59

Test description
This test tests myX-3 & myX-5 phones during a call.
Required tools
− a Wavetek
− a radio interface myX-3 & myX-5.
−
an adjustable regulate power supply 0-15V / 4A
Installation
RF test
Wavetek
Test procedure
25. Position the myX-3 or myX-5 module on the radio interface (1) (provided with a SIM test card)
26. Press and lock the button (2) , press the start key
27. Switch the Wavetek on and press on "AUTOTEST".
28. Choose the corresponding program using the "UP" et "DOWN" arrows.
−
Mobile :myX-3 or myX-5,
−
Frequency range : GSM, DCS or GSM/DCS,
−
Coupling type : CABLE.
29. Press on "ENTER" and wait until the end of the calibration.
Follow the instructions shown on the Wavetek.
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002
Site Technical Documentation – GSM 900 / 1800 myX-3 & myX-5
SMA cable
COUPLER
TNC / SMA adaptator
2
1
Phone
+
4Volts
-
Regulate power supply
0-15V /4A
Page 5-1