Sagem myX-5 Technical Documentation Manual page 47

myX-3 & myX-5
SWAP : Electronic board Configuration
the mobile is not recognized
when the following message
is displayed "Reading
informations from the mobile
failed...."
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002
TEST AND CHECK BY OMM
plug the connector
of downloading kit
into the defective
perform the step 1
defective board
perform the step 2
No
perform the step
3b
perform the step
perform the step
3c
perform the step 4
perform the step 5
perform the step 6
perform the step 7
Test Sheet 01
board
by placing a keypad on the
turn on the
defective board and by
pressing the start key
mobile
recognized
the mobile is recognized
when the IMEI number,
Yes
Reference and Type of
mobile are displayed
3a
1/1
Page 4-41