Sagem myX-5 Technical Documentation Manual page 66

myX-3 & myX-5
4.16 Tools :
- Not applicable
4.17 Preliminary operation :
1. Remove the back cover (
4.18 Removal procedure :
30. Separate the two front cover (2) fixing stop pins (3) to release the electronic module (1).
31. Remove the equipped front cover (2).
32. Remove the elastomer keypad (4).
4.19 Placement procedure :
1. On the new front cover (2), position the elastomer keypad (4) in position, ensuring it is free of dust.
2. Place the module (1)onto front cover (2) ,engaging firstly the module top, then press on the module top
(1)
4.20 Further operations
1. Place the back cover
Ref. SCT U38 SSC DTS 009 – Index B - December 12 , 2002
REMOVING / REPLACING THE FRONT COVER
Proc sheet 0 01).
(Proc sheet 0 01).
Proc Sheet 0 03
1/2
Page 5-8