Mounting; Adhesive Strip Mounting - HomeMatic HMIP-WTH Mounting Instruction And Operating Manual

• If the LED lights up red, please try again.
• In the app, give the device a name and allocate
it to a room.
5.2

Mounting

Please read this entire section before starting to
mount the device.
You can use the supplied clip-on frame (A) to mount
the wall thermostat or easily integrate it into an exist-
ing switch (see „5.2.1 Adhesive strip mounting" on page
31).
If you want to mount the wall thermostat with the sup-
plied clip-on frame, you can use
• the supplied double-sided adhesive strips or
• the supplied screws
to fix it to a wall.
5.2.1

Adhesive strip mounting

For mounting the assembled wall thermostat with adhe-
sive strips, please proceed as follows:
• Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and sol-
vents and not too cold to ensure long-time ad-
herence.
Start-up
31