Fluke 433 User Manual page 86

Fluke 433/434
Users Manual
Measuring Function/
Screen Type
1. Scope Waveform
2. Volts/Amps/Hertz Trend
3.
Dips & Swells Trend
4. Harmonics Table
Trend
5. Power & Energy Trend
6. Flicker Trend
Function
7. Unbalance Trend
8. Transients Waveform
Function
9. Inrush Trend
Function
10. Monitor Trend Vrms
Trend Harmonic
Flicker Trend
Unbalance Trend
Frequency Trend
Available function keys:
11
12
13
18-8
Measuring Data to be adjusted
Volt, Amp (separate for Phase
and Neutral)
Volt (Peak), Amp (Peak), CF,
(separate for Phase and Neutral),
Hz
Volt, Amp (separate for Phase
and Neutral)
Harmonics to be displayed, THD,
DC, V, A, W, V&A, %r (of rms) /
%f (of fundamental)
Harmonics, THD, DC
W, VA, VAR, PF, DPF/cosΦ,
Vrms, Arms (separate for Phase
and Neutral)
Demand Interval, kWh/pulse,
DPF/cos ϕ, FULL/FUNDamental
Pst, Plt, Dc, Dmax, Td<%, PF5
D-parameter Settings
Unbal V, Unbal A, V, A, Hz, ΦV-V,
ΦV-A (separate for Phase and
Neutral)
V, A (separate for Phase and
Neutral)
Trigger conditions
A, V(separate for Phase and
Neutral)
Trigger conditions
V, A (separate for Phase and
Neutral)
Number
Pst, Plt
Percentage
Hz
F1 - DEMO mode: the input sensitivities are increased to 2 V for use
with a demo generator. The generator is capable to generate 3-phase
voltages and currents with various interference types.
F4 - ALL DEFAULT: resets all settings in this menu to factory default.
F5 - BACK: return to SETUP entry menu.
Settings Type
Range
Offset + Span
(2 screens)
Offset + Span
Harmonic order
Offset + Span
Offset + Span
(2 screens)
To customize measurements
Offset + Span
Steady time, Steady Tolerance,
Threshold
Offset + Span (2 screens)
Span
V/A level + type of trigger
Offset + Span
Current characteristics
(2 screens)
Offset + Span
Offset + Span
Offset + Span
Offset + Span
Offset + Span