Table of Contents
Advertisement
Fluke 433/434
Users Manual
The Settings are grouped in four functional sections and are explained accordingly in four
sections of this manual chapter:
•
•
•
•
The figure below shows the entry menu present under the SETUP key.
Entering the Setup menu:
Menu navigation and selections:
18-2
Figure 18-1. Welcome screen at power-on
General Settings: Date, Time, wiring Configuration, nominal Voltage, nominal
Frequency, current and voltage probe type, information language, survey and
installation of options.
FUNCTION PREFerences: adjustment of Offset and Span of Trend and Waveform
displays, contents of harmonics table and harmonics settings, power settings, flicker
D-parameter settings, Inrush defaults, and Transient settings. Function key F4 in
these menus gives a reset to factory default settings. Default settings usually give a
good display.
USER PREFerences: adjustment of Phase Identification and Colors, Printer and RS-
232 settings, Auto shut-off, definition of User name (as shown in entry screen), and
display contrast. Many menus have a function key for reset to factory default settings.
Limits Settings: for save, recall, and definition of the limits for power quality
monitoring.
SETUP
Selection of the item to be adjusted.
Press to access the selected settings menu.
ENTER
To select (up/down) and adjust (left/right) items in a settings
menu.
Confirm the selection and return to previous menu.
F5
Advertisement
Table of Contents
