Table of Contents
Advertisement
Fluke 433/434
Users Manual
10
11
12
13
18-4
Freq: adjustment of Nominal Frequency. Use the up/down arrow keys
6
to select 60 or 50 Hz. Press Function key F5 – OK to confirm.
Limits: see section Limits Settings.
7
Clamp, A range, V scale: adjustment of the Analyzer to the
8
characteristics of current clamps and voltage leads. The default
selection is valid for the accessories as supplied with the Analyzer. The
supplied voltage leads are 1:1 types; when using attenuating leads or a
voltage transformer you must adapt the voltage scale accordingly (e.g.
10:1 for 10 times attenuation). There are separate selection tables for
the Phases and Neutral: Function key F3 is used for selection.
F1 – LANGUAGE: use the up/down arrow keys to select the desired
9
information language. Press Function key F5 – OK to confirm.
F2 – VERSION & CAL: access to a read-only menu showing Model
Number, Serial Number, Calibration Number, Calibration Date, and a
survey of installed Options. The submenu under F1 is used to activate
options. Chapter 20 Tips and Maintenance explains how to do this.
F3 – FUNCTION PREF.: see section FUNCTION PREFerence.
F4 – USER PREF.: see section USER PREFerence.
F5 – BACK: return to last active measuring mode.
Advertisement
Table of Contents
