Top Panel Features; Installing Memory Cards - Hand Held Products Dolphin 7600 Series User Manual

Top Panel Features

Access Door
Image Engine Window
(with engine)
*Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine.
Access Door
For more memory, you can install optional memory cards by removing this door. For details, see
Cards on page
When closed, the access door seals the memory interface from moisture and particle intrusion thus preserving the
terminal's environmental rating.
Image Engine Window
The angled image engine reads and decodes most popular bar code symbologies and takes images like a digital
camera. For more information, see

Installing Memory Cards

The Dolphin 7600 supports Secure Digital (SD) memory cards of the following capacities:
• 256 MB
• 512 MB
• 1 GB
• 2 GB
To install an SD card, you must open the access door on the top panel
Note: Access door removal requires a Phillips head screwdriver.
1. Press Blue + Backlight key to put the terminal in suspend mode; see
2. Place the terminal on a flat, secure surface with the keyboard face-up.
3. Unscrew both screws on the access door.
3 - 6
3-6.
Using the Image Engine
Rev B
1/17/2007
on page 5-1.
(Top Panel Features, page 3-6).
Suspend Mode on page 3-14.
Dolphin® 7600 Series User's Guide
Installing Memory