Shielding Gas Setup Menu; General; Accessing The Shielding Gas Setup Menu; Changing Welding Parameters - Fronius TransTig 1750 Puls Operating Instructions Manual

Shielding gas setup menu

General

The Shielding gas setup menu provides easy access to the shielding gas settings.
Accessing the
Shielding gas set-
up menu
Changing weld-
ing parameters
Exiting the
Shielding gas set-
up menu
Welding parame-
GPr
ters in the Shield-
Gas pre-flow time
ing gas setup
menu
Unit
Setting range
Factory settings
G-L
Gas low - gas post-flow time at minimum welding current (minimum gas post-flow time)
Unit
Setting range
Factory settings
G-H
Gas high - increase in the gas post-flow time at maximum welding current
Unit
Setting range
Factory settings
64
Press and hold the Mode button
1
Press the Gas test button
2
The power source is now in the Shielding gas setup menu. The last
welding parameter selected is displayed.
Use the left or right Parameter Selection button to select the param-
1
eter that you want to change
Use the adjusting dial to change the parameter value
2
Press the Mode button
1
s
0.0 - 9.9
0.4
s
0.0 - 25.0
5
s
0.0 - 40.0 / Aut
Aut