Cleaning And Maintenance; Air Inlet/Main Unit; Plasmacluster Ion Generating Unit - Sharp IG-CM1A Operation Manual

CLEANING AND MAINTENANCE

WARNING: When cleaning the unit, be sure to fi rst unplug the power cord.
Gently remove dust from the air inlet by using a
vacuum cleaner.
• Do not press the vacuum cleaner strongly against the
air inlet, or the fi lter could be damaged.
Main Unit
Wipe with a dry soft cloth.
For stubborn dirt, use water and a mild detergent. And then, wipe with a wet cloth. Make sure
to dry out the main unit.
Do not use the following
products:
(These products may damage
the unit)

Plasmacluster Ion Generating Unit

Remove the dust from the electrode
section of the unit with an included
cleaning brush or a cotton swab.
(See "Replacement Guide" on E-10)
• Do not touch the electrode section. (Otherwise, it may lead to injury.)
• The electrode section is not transformed. (Otherwise, it may lead to damage.)
• Do not touch the connection terminals. (Otherwise, it may lead to damage.)
• Please damp the tip of a cotton swab with little water, if the dirt does not come off easily.
IG-CM1A.EN.indd 10 IG-CM1A.EN.indd 10
Air Inlet
Every week or more often if necessary
Every month or more often if necessary
Thinner
Benzine
Alcohol
Synthetic detergent
for home furniture
(alkaline)
Every 3 months or more often if necessary
Сleaning Brush
Electrode Section
Connection
Terminals
E-8
Air Inlet
Oven cleaner
Cleanser
Bleach
Spray cleaner
Metal sponge
2011/03/07 14:04:28 2011/03/07 14:04:28