Cleaning And Maintenance; Air Inlet/Main Unit; Plasmacluster Ion Generating Unit - Sharp IG-DM1A Operational Manual

CLEANING AND MAINTENANCE

WARNING: When cleaning the unit, be sure to fi rst unplug the power cord.
Gently remove dust from the air inlet by using a
vacuum cleaner.
• Do not press the vacuum cleaner strongly against
Wipe with a dry soft cloth.
For stubborn dirt, use water and a mild detergent. And then, wipe with a wet cloth.
Make sure to dry out the main unit.

Plasmacluster Ion Generating Unit

Remove the dust from the electrode
section of the unit with an included
cleaning brush or a cotton swab.
(See "Plasmacluster Ion Generating Unit
Replacement" on E-9)
• Do not touch the electrode section. (Otherwise, it may lead to injury.)
• The electrode section is not transformed. (Otherwise, it may lead to damage.)
• Do not touch the connection terminals. (Otherwise, it may lead to damage.)
• Please damp the tip of a cotton swab with little water, if the dirt does not come off
IG-DM1A.EN.indd 10 IG-DM1A.EN.indd 10
Air Inlet
Every week or more often if necessary
the air inlet, or the fi lter could be damaged.
Main Unit
Every month or more often if necessary
easily.
Every 3 months or more often if necessary
Сleaning Brush
Connection
Terminals
E-8
Air Inlet
Electrode Section
(2 places)
2012/01/30 9:21:55 2012/01/30 9:21:55