Installation Guide - Sharp IG-CM1A Operation Manual

INSTALLATION GUIDE

Precautions
Precautions on installation
• Operating temperature : 0°C to 40°C (Operating with AC adapter : 5°C to 35°C)
• Be sure to place the product at the stable place.
• Do not block the air inlet and the air outlet.
• Do not leave in the car.
• If this Plasmacluster Ion Generator cause interference to radio or television reception, try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Increase the distance between the product and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not use items of silicone-containing products* near the unit.
* Hair care products (split end coatings, hair mousses, hair treatments, etc.), cosmetics,
antiperspirants, antistatic agents, waterproofi ng sprays, polishes, glass cleaners, dustcloth, wax, etc.
• The fluororesin or silicone could get stuck inside the unit, preventing it from producing
Plasmacluster ions. If this happens, clean regularly. (See E-8)
• You can charge the product by inserting an included USB cable into USB connector
of PC. Sharp will not bear responsibilities for PC malfunction or data loss caused by
charging.
To charge
When you use the product for the fi rst time or you have not used the product for a
long time, be sure to charge the product.
1
2
3
• The charging time and the continuous use time of rechargeable battery vary depending on
use environment and condition of battery.
IG-CM1A.EN.indd 8 IG-CM1A.EN.indd 8
Connect the USB cable or AC adapter to the main unit.
Insert outlet or USB connector.
AC Adapter
USB Cable
Charging light goes out when fully charged.
(Approx. 4 hours and 45 min.)
Unplug the AC adapter or the
USB cable and disconnect
from the main unit.
Charging lamp
Open
is lighting (red)
Terminal Cover
E-6
Close
2011/03/07 14:04:27 2011/03/07 14:04:27