Cleaning And Maintenance - Sharp IG-GC2EU Operation Manual

CLEANING AND MAINTENANCE

FILTER
The filter must be cleaned regularly in order to maintain the ion density. Filter
soiling depends on the usage environment, so clean the filter frequently as
necessary. With frequent cleaning, Plasmacluster ions can be released efficiently.
Main Unit Cover
1
Filter Cover
Filter
2
Note
• Do not press the vacuum cleaner strongly against the filter, or
the filter could be damaged.
• If using synthetic kitchen detergent, rinse well to remove all
traces of the detergent. Also, be sure to dry the filter in the
shade.
• Dry the product in a shaded area so that water drops do not
remain in the gap between the filter cover and the filter.
3
Filter Cover
MAIN UNIT
Wipe with a dry soft cloth.
<For Stubborn Dirt> Use water and a mild detergent. And then, wipe with a wet
cloth. Make sure to dry out the main unit.
Frequently as necessary
Open Close
Open Close
Upper Claw
Lower Claw
Every month or more often if necessary
E-8
1. Rotate the main unit to fit "
on the main unit cover and " "
on the filter cover.
2. Pull the filter cover downward
and remove.
Dismantle the filters while
pushing and remove dust
with a vacuum cleaner.
• If the filter is dirty,
Filter
simply wash with water.
1. Attach the filter back to the
filter cover. (Insert the filter
Filter
to the upper claw and
lower claw)
2. Reattach the filter cover.
"