Table of Contents
Advertisement
ENGLISH
IG-CM1A.EN.indd 3
IG-CM1A.EN.indd 3
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ...............
PARTS NAME ........................................................
• FRONT/CONTROL PANEL .................................................. E-4
• BACK/ACCESSORIES ........................................................ E-5
INSTALLATION GUIDE .........................................
• AIR INLET/MAIN UNIT ........................................................ E-8
• PLASMACLUSTER ION GENERATING UNIT .................... E-8
• While IG-CM1A can inactivate suspended viruses and other
contaminants, it cannot create a completely sterile environment.
SHARP does not guarantee its ability to prevent microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-CM1A will need
to be replaced periodically*.
• The actual number of ions and the effect of inactivation,
purification, and beauty vary depending on the conditions of a
room (size, shape, whether an air conditioner or ventilation is
used, installation location of the product etc.) or usage (blowing
direction of ion etc.).
* Replacement is required approximately every 6 years (17,500 hours) when
operated 8 hours a day. IG-CM1A will stop operating after about 6 years and 6
months (19,000 hours) if the Plasmacluster Ion Generating Unit is not replaced.
Thank you for purchasing this SHARP Plasmacluster Ion Generator.
Please read this manual carefully before using Plasmacluster Ion
Generator.
After reading, keep the manual in a convenient location for future
reference.
...............................
E-1
E-2
E-3
E-4
E-6
2011/03/07 14:04:26
2011/03/07 14:04:26
Advertisement
Chapters
Table of Contents
