Ricoh SP C352dn User Manual page 94

3. Troubleshooting
Problem
Edges of sheets are creased.
Duplex printing is
malfunctioning.
Duplex printing is
malfunctioning.
The image on the back side of
duplex printing has mottled
blank patches or is smudged.
White stripes appear on the
OHP.
92
Cause
You are using non-
recommended paper.
You have selected a paper tray
that is not set for duplex print.
You have selected a paper type
that cannot be used for duplex
printing.
Missing patches and smudges
are caused by moisture leaking
from the paper.
Fragments of paper are stuck to
the OHP.
Solution
Use recommended paper. For
details about recommended
paper, see page 34 "Paper Size
Specifications" and page 37
"Paper Type Specifications".
Change the setting to enable
duplex printing for the paper
tray.
In [Tray Paper Settings], select a
paper type that can be used for
duplex printing. For details about
the paper types that can be
used, see "Printing on Both Sides
of a Page", Operating
Instructions.
• Do not install the printer in
areas that are susceptible to
low temperature.
• Use paper that has been
stored in the recommended
temperature and humidity
conditions. For details about
the proper way to store
paper, see page 39 "Paper
Precautions".
Use a dry cloth to wipe any
paper fragments off the back of
the OHP.