Ricoh SP C352dn User Manual page 83

Problem
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
[List / Test Print] is disabled.
Cause
If the printer is using wireless
LAN, the receiver's MAC
address may be preventing
communication with the access
point.
The wireless LAN interface is
not working.
The Login User Name, Login
Password, or Driver Encryption
Key is incorrect.
Advanced encryption has been
set using the Extended Security
function.
A mechanical error might have
occurred.
When You Cannot Print
Solution
Check the access point settings
when using the infrastructure
mode. Depending on the access
point, client access may be
filtered by MAC address. Also,
check that there are no
transmission problems between
the access point and wired
clients, and between the access
point and wireless clients.
Make sure the orange LED is lit,
and the green LED is lit or
flashing during transmission.
Check the Login User Name,
Login Password, and Driver
Encryption Key.
Check the settings of the
Extended Security function. For
details about Extended Security
function settings, see "Specifying
the Extended Security Functions",
Security Guide.
Contact your service
representative.
81