Troubleshooting; When A Panel Tone Beeps - Ricoh SP C352dn User Manual

3. Troubleshooting

This chapter provides solutions to common problems and it also explains how to correct unwanted print
results.

When a Panel Tone Beeps

The following table describes various beep patterns that the printer produces to alert users about printer
conditions and the meaning of each beep pattern.
Beep pattern
Single short beep
Two long beeps
Single long beep
Four long beeps
Five short beeps repeated
five times.
• Beep alerts cannot be muted. If the printer's covers are opened and closed repeatedly within a
short space of time during an alert indicating a paper jam or insufficient toner, a beep alert might
continue, even after normal status has resumed.
• You can enable or disable beep alerts. For details, see "General Features", Operating Instructions.
Meaning
Panel/screen input
accepted.
Printer has warmed up.
Job completed.
Printer initialized.
Strong alert
Causes
A control panel key was pressed.
When the power is turned on or the
printer exits Sleep mode, the printer
has fully warmed up and is ready for
use.
A Printer job has finished.
The screen is changing back to the
initial screen after the printer came out
of the energy-saving mode or was
reset.
The printer requires user attention
because paper has jammed, the toner
needs replenishing, or other problems
have occurred.
59