Ricoh SP C352dn User Manual page 101

Problem
The color of the printout is
different from the color
specified.
The color changes significantly
when adjusted with the printer
driver.
Color documents are printed in
black and white.
Solid areas, lines, or text are
shiny or glossy when created as
a mixture of cyan, magenta,
yellow.
Black gradation is not natural.
A color is missing or partially
blurred.
If a specific color is missing turn the printer off, wait a few moments,
and then turn it on again. If this does not resolve the problem,
contact your sales or service representative.
Do not make extreme settings for the color balance on the [Print
Quality] menu under the [Detailed Settings] tab in the printer
driver's dialog box.
Note that the sample image displayed in the printer driver is used
only to show what processing will be performed, so it may not
match the print results.
For details, see the printer driver's Help.
• Color printing is not enabled for the printer.
For details, see the printer driver's Help.
• Some applications print color files in black and white.
• Select [K (Black)] for [Gray Reproduction:] in the printer
driver's dialog box.
For details, see the printer driver's Help.
• Select [CMY + K] for [Gray Reproduction:] in the printer
driver's dialog box.
For details, see the printer driver's Help.
• Paper is damp. Use paper that has been stored properly.
For details, see page 39 "Paper Precautions".
• A print cartridge is almost empty. When the "Toner Cartridge
is almost empty. Replace Toner Cartridge." message appears
on the display panel. If the toner indicator on the initial screen
seems empty, replace the print cartridge of the displayed
color.
For details, see "Replacing the Print Cartridge", Operating
Instructions.
• Condensation may have collected. If there were sudden
changes in temperature or humidity, restart the printer when it
is acclimatized.
Other Printing Problems
Solutions
99