Ricoh SP C352dn User Manual page 45

3. Squeeze the clip on the side paper guide and slide it to match the paper size.
4. Squeeze the end guide and slide it inward to match the standard size.
5. When loading paper into tray 1, slide the two switches at the bottom of the tray
according to the thickness of the paper.
If the paper is 164 g/m
paper is lighter than 163 g/m
6. Set the paper straight down on the paper source tray with its printing side facing up.
Make sure paper is not stacked higher than the upper limit (upper line) marked inside the tray.
DSE119
DSE253
DSE168
2
(44 lb.) or thicker, slide both switches into the rear (thick) position. If the
2
(43 lb.), slide both switches into the forward (thin) position.
Loading Paper into Paper Trays
43