Ricoh SP C352dn User Manual page 80

3. Troubleshooting
Message
"User Paper Type Error"
"You do not have a
privilege to use this function.
This job has been
cancelled."
"You do not have a
privilege to use this function.
This job has been
cancelled."
"You have no privilege to
use this func. Operation
canceld."
Messages during Direct print from a memory storage device
Message
"99: Error"
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "Test
Printing", Operating Instructions.
78
Cause
The printer does not recognize the
paper type specified using the
printer driver.
The entered Login User Name or
Login Password is not correct.
The logged in user is not allowed
to use the selected function.
The logged in user does not have
the privileges to register programs
or change the paper tray settings.
Causes
This data cannot be printed. The
specified data is either corrupt or
not supported by the Direct
printing function from memory
storage devices.
Solution
Check that the printer is
connected to the network
correctly and bidirectional
communication is enabled. If the
problem persists, confirm the user
paper type settings of the printer.
For details, see "Registering
Unique Names to Paper Types",
Operating Instructions.
Check that the Login User Name
and Login Password are correct.
For details about how to set
permissions, see "Configuring
User Authentication", Security
Guide.
For details about how to set
permissions, see "Configuring
User Authentication", Security
Guide.
Solutions
Check that the data is valid. For
details about the kinds of data
supported by the Direct printing
function from memory storage
devices, see "Direct Printing from
a Memory Storage Device",
Operating Instructions.