Description Of Radio Control Set - GRAUPNER MX-10 HOTT Programming Manual

mx-10
Computer System
Five-channel radio control set with Graupner HoTT 2.4 GHz technology (Hopping Telemetry Transmission)
Graupner HoTT technology offers excellent reliabi-
lity in use, with bi-directional communication bet-
ween transmitter and receiver, integrated telemetry
(with the optional Smart-Box) and ultra-fast respon-
se times.
Simplifi ed programming technology with „Jumpers".
78

Description of radio control set

• Micro-computer radio control system exploiting the
latest Graupner HoTT 2.4 GHz technology
• Bi-directional communication between transmitter
and receiver
• Ultra-fast response times through direct, ultra-reliable
data transmission from the main processor to the 2.4
GHz RF module.
• Telemetry menu (with the optional Smart-Box) for
displaying telemetry data, and programming receiver
outputs and optional sensors.
• Short, folding aerial
• Easy programming and accurate setting with toggle
switches and a switch key
• 3 switches: a three-position switch for Trainer/pupil-
mode, 2 two-position switches for dual rate and
channel 5 are already built
• 5 control functions, including 1 switching channel
• Servo reverse
• Mode selector for simple switching between stick
MODES 1 ... 4 (throttle left / right, etc.) All applicable
settings are automatically converted.
• Wing menu: 1 Ail, 2 Ail, V-tail, delta/fl ying wing
The following settings can only be done via the optional
Smart-Box:
• User-selectable servo cycle times for digital servos,
min. 10 ms
• Servo-control ± 150% for all servo outputs can be set
separately for each side (Single Side Servo Throw)
• Sub-trim in the range of ± 125% to adjust the neutral
position of all servos
General features of the HoTT system
• Simple, ultra-fast binding of transmitter and receiver
• Multiple receivers can be bound per model for paral-
lel operation
• Extremely fast re-binding, even at maximum range
• Two-receiver satellite operation using special cable
connection