Appendix - GRAUPNER MX-10 HOTT Programming Manual

Appendix

PRX (Power for Receiver)
Order No. 4136
A highly developed stabilised receiver power supply with intelligent
power management.
The unit constitutes a stabilised user-selectable power supply for the
receiver, and provides a further enhancement in the reliability of the
airborne power supply. It is designed for use with different types of
receiver battery, to ensure that it is straightforward and versatile in use.
When the model is operating, even brief collapses in battery voltage
are stored and displayed, offering the user the means of detecting a
receiver battery which is not "up to the job", or failing.
• For use with one or two receiver batteries (simultaneous discharge if
two batteries are employed)
• Suitable for fi ve-cell or six-cell NiMH batteries, or two-cell LiPo or
LiFe packs. Graupner/JR, G3.5, G2 and BEC connector systems.
• Three user-selectable receiver power voltage levels: 5.1 V / 5.5 V /
5.9 V.
• Two ultra-bright LEDs indicate the operational status of batteries 1
and 2 separately.
• Integral high-quality On / Off switch.
• Constructed to cope with high-current applications.
• Low-profi le switch and LEDs to avoid spoiling the appearance and
effi ciency of the model.
• Straight-through design of mounting lugs, LEDs and switch for simp-
le installation using drilling template (supplied).
Graupner HoTT GPS / Vario module
Order No. 33600
Vario with altitude signals and fi ve different tones for climb and
descent, plus GPS with range measurement, distance measurement,
speed indicator, display of fl ight direction and co-ordinates
• Additional warning thresholds for min. altitude, max. altitude, two-sta-
ge climb and descent rate
• Altitude display, storage of min. and max. altitude
• Variable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, constant
• Variable warning repeat time: constant, 1, 2, 3, 4, 5 min, once
• The GPS / Vario sensor can be connected directly to the receiver's
telemetry input.
Specifi cation, vario
• Altitude measurement: -500 m ... +3000 m
• Resolution: 0.1 m
• Sensitivity, vario: 0.5 m/3s, 1 m/3s, 0.5 m/s, 1 m/s, 3 m/s, program-
mable per beep
• Calculated average value: 4 - 20 measurements per measured va-
lue, programmable
Graupner HoTT Vario module
Order No. 33601
Vario with altitude signals and fi ve different tones for climb and
descent; altitude display and storage of min. and max. altitude.
• Additional warning thresholds for min. altitude, max. altitude, two-sta-
ge climb and descent rate
• Variable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, constant
• Variable warning repeat time: constant, 1, 2, 3, 4, 5 min, once
• The vario sensor can be connected directly to the receiver's teleme-
try input.
Specifi cation
• Altitude measurement: -500 m ... +3000 m
• Resolution: 0.1 m
• Sensitivity, vario: 0.5 m/3s, 1 m/3s, 0.5 m/s, 1 m/s, 3 m/s, program-
mable per beep
• Calculated average value: 4 - 20 measurements per measured
value, programmable
Appendix 131