Fixed-Wing Model Aircraft - GRAUPNER MX-10 HOTT Programming Manual

Fixed-wing model aircraft

This program provides convenient support for normal
model aircraft with up to two aileron servos, V-tail
models, fl ying wings and deltas with two elevon (aileron
/ elevator) servos.
The majority of power models and gliders belong to the
"normal" tail type with one servo each for elevator, rud-
der, ailerons and throttle or electronic speed controller
(airbrakes on a glider).
If your model features two separate aileron servos (and
also in some cases two fl ap servos), the aileron travel of
both pairs of control surfaces can be set up with diffe-
rential movement in the "Tail type" menu.
If the model features a V-tail instead of a conventional
tail, you need to select the tail type "V-tail" with in the
"Tail type" menu, as this automatically superimposes
the elevator and rudder control functions in such a way
that each tail panel can be actuated by a separate servo.
For deltas and fl ying wings it is easy to set up mixed
elevons, i. e. the aileron and elevator functions can be
carried out via common control surfaces at the trailing
Tail type „normal"
Aileron
Rudder
Elevator
edge of the right and left wing. As standard the program
contains the appropriate mixer functions for the two
servos.
More functions are programmable with the optional
Smart Box. See the section „Telemetry" on page 113.
Pre-installed "wing mixers" of the mx-10 HoTT
1. No mixer ¼ Tail type „normal"
2. Mixer AILERON ¼ 2 Ailerons
3. Mixer DELTA ¼ Flying wings
4. Mixer V-Tail ¼ V-Tail
See the pictures below on this page.
Mixer AILE „2 Aileron"
Aileron
Rudder
Elevator
Aileron
Example: V-tail mixer
Elevator stick
Rudder stick
Mixer DELTA „Flying wings"
AIL+EL
Rudder
left
AIL+EL right
3 3
Left rudder / elevator
V-tail mixer
Right rudder / elevator
4 4
Mixer „V-Tail"
left
Rudder+Elevator
right
Fixed-wing model aircraft 101