Rx Free Mixers - GRAUPNER MX-10 HOTT Programming Manual

RX FAIL SAFE
OUTPUT CH: 01
INPUT CH: 01
MODE : FAI-SAFE
F.S.Pos. : 1500—sec
DELAY : 0.75sec
FAIL SAFE ALL:
POSITION : 1670—sec
After pressing the INC+DEC button once more, the
display reverts from "SAVE" to "NO". This indicates that
the position of all the servos affected by the procedure
have now been stored, and have also been adopted
in the "F.S.Pos." line. At the same time the position for
the current OUTPUT CH (servo socket) is immediately
displayed on the screen.
RX FAIL SAFE
OUTPUT CH: 01
INPUT CH: 01
MODE : FAI-SAFE
F.S.Pos. : 1670—sec
DELAY : 0.75sec
FAIL SAFE ALL: NO
POSITION : 1670—sec
Switch the transmitter off, and check the Fail-Safe posi-
tions by observing the servo movements.
"Fail-Safe" in combination with "channel mapping"
It is clearly desirable that mapped servos - i. e. servos
which are controlled by a common control channel
(INPUT CH) - should respond in the same way when
interference occurs, so the corresponding settings of the
INPUT CH determine the behaviour of mapped servos.
For example, if you are using a GR-16 eight-channel
receiver, Order No. 33508, and receiver servo sockets
6, 7 and 8 are mapped together, i. e. if the same control
channel "04" is assigned as INPUT CH to OUTPUT CH
(servo sockets) 06, 07 and 08 ...
RX FAIL SAFE
OUTPUT CH: 06
INPUT
MODE
F.S.Pos. : 1670—sec
DELAY
SAVE FAIL SAFE ALL: NO
POSITION : 1670—sec
RX FAIL SAFE
OUTPUT CH: 07
INPUT
MODE
F.S.Pos. : 1230—sec
DELAY
FAIL SAFE ALL: NO
POSITION : 1670—sec
RX FAIL SAFE
OUTPUT CH: 08
INPUT
MODE
F.S.Pos. : 1770—sec
DELAY
FAIL SAFE ALL: NO
POSITION : 1670—sec
... then INPUT CH 04 determines the Fail-Safe behavi-
our of the three servos connected to control channel 4,
regardless of the individual settings of the OUTPUT CH
for INPUT CH 04:
RX FAIL SAFE
OUTPUT CH: 04
INPUT
MODE
F.S.Pos. : 1500—sec
DELAY
FAIL SAFE ALL: NO
POSITION : 1500—sec
This also applies, for example, if it is mapped in turn to
INPUT CH 01:
CH: 04
: OFF
: 0.75sec
In this case servo socket 04 would respond in ac-
cordance with the Fail-Safe settings for CH 01.
CH: 04
In contrast, the response or delay time set in the "DE-
: OFF
LAY" line always applies uniformly to all channels which
are set to "FAIL-SAFE".
: 0.75sec
RX FREE MIXER
CH: 04
: HOLD
: 0.75sec
Value
MODE
MASTER CH Primary channel
SLAVE CH
CH: 04
: FAI-SAFE
S-TRAVEL–
: 0.75sec
S-TRAVEL+
RX FAIL SAFE
OUTPUT CH: 04
INPUT CH: 01
MODE : FAI-SAFE
F.S.Pos. : 1500—sec
DELAY : 0.75sec
FAIL SAFE ALL: NO
POSITION : 1500—sec
RX FREE MIXER
MODE : 1
MASTER CH: 00
SLAVE CH : 00
S–TRAVEL–: 100
S–TRAVEL+: 100
RX WING MIXER
TAIL TYPE: NORMAL
Explanation Possible settings
Mixer select 1, 2 or 3
0, 1 ... according
to transmitter
Secondary 0, 1 ... according
channel to receiver
Negative mix 0 ... 100%
value
Positive mix value 0 ... 100%
Program description: Telemetry menu 119