Cleveland steamcraft 21-CET-8 Service Manual page 3

PROTECTING WARRANTY COVERAGE
The warranty printed to the left specifies the owner/user's responsibility for proper
installation, operation, and maintenance of the SteamCraft 3.1. If these responsibilities
are not met, the Limited Warranty and/or Extended Limited Warranty coverage may be
adversely affected. The following table is provided to assist the owner/user in meeting
these responsibilities. In addition, the warranty advantages of installing a SteamerGard
water treatment system are explained after the table.
The Warranty Protection Table lists installation, operation, and maintenance factors
that have in the past adversely affected warranty coverage. The owner/user of a
SteamCraft 3.1 should pay particular attention to these factors to protect his warranty
coverage. This table is not a comprehensive list of the owner/user's responsibilities.
Cleveland Range steam products are intended for use only by professionally trained
personnel. To meet his responsibilities, the owner/user must supplement this guide
with any additional actions consistent with the operation of steam generating food
preparation equipment by a trained professional.
Warranty Protection Table
SUBJECT PAGE
REFERENCE
Electrical Power Requirements and Line Voltage.....................6 and 17
Water Quality Requirements and Analysis........................................6
Water Pressure.........................................................................18
Vented Drain.............................................................................14
Level Operation.........................................................................10
Blowdown Frequency........................................................41 and 52
Steam Generator Maintenance and Maintenance Records..................55
Descaling Frequency and Procedure..............................................56
Approved Chemical Cleaners........................................................56
Authorized Maintenance and Repair...............................................61
SteamerGard Water Treatment System
A SteamerGard water treatment system protects the SteamCraft 3.1 from impurities
contained in regular tap water, especially Total Dissolved Solids (TDS) which cause
lime and scale deposits in steamer equipment The protection is so effective that
Cleveland Range increases the warranty coverage on a SteamCraft 3.1 installed in
conjunction with a SteamerGard system to five years for parts and three years for labor
on water related components, elements, valves, generators, piping, etc. However, even
with a SteamerGard system installed, the owner/user should follow the guidance of the
Warranty Protection Table.