Download  Print this page

Panasonic SA-BT300PX Service Manual

Blu-ray disc home theater sound system.
Hide thumbs

Advertisement

Notes: These model's BD Drive/Digital P.C.B.
Module are - RFKNBT300P.
Caution:
Pairing of BD Drive and Digital P.C.B. as "BD Drive/Digital P.C.B. Kit Assembly" have to be replaced
together. If the either BD Drive or Digital P.C.B. is changed, BD Drive unit has to be re-aligned. Because the
alignment data for BD Drive Unit is stored in Digital P.C.B.

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. GENERAL GUIDELINES -------------------------------- 3
1.2. Before Use -------------------------------------------------- 3
Blu-ray Disc Home Theater Sound System
Model No.
Vol.1
Product Color: (K)...Black Type
PAGE
1.3. Before Repair and Adjustment--------------------------4
1.4. Protection Circuitry ----------------------------------------4
1.5. Safety Parts Information----------------------------------5
SA-BT300PX
© Panasonic Corporation 2009. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
PSG0907004CE
A6
PAGE

Advertisement

Table of Contents

   Related Manuals for Panasonic SA-BT300PX

   Summary of Contents for Panasonic SA-BT300PX

  • Page 1: Table Of Contents

    1 Safety Precautions----------------------------------------------- 3 1.3. Before Repair and Adjustment--------------------------4 1.1. GENERAL GUIDELINES -------------------------------- 3 1.4. Protection Circuitry ----------------------------------------4 1.2. Before Use -------------------------------------------------- 3 1.5. Safety Parts Information----------------------------------5 © Panasonic Corporation 2009. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 2 Warning --------------------------------------------------------------6 10.1. Checking & Servicing of Main P.C.B. --------------- 65 2.1. Prevention of Electrostatic Discharge (ESD) 10.2. Checking & Servicing of SMPS P.C.B. ------------- 66 to Electrostatic Sensitive (ES) Devices ---------------6 10.3. Checking & Servicing of Digital P.C.B. ------------- 67 2.2.
  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
  • Page 4: Before Repair And Adjustment

    1.3. Before Repair and Adjustment Disconnect AC power to discharge unit AC Capacitors as such (C5700, C5701, C5702, C5703, C5704, C5705, C5706) through a 10 Ω, 10 W resistor to ground. Caution: DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
  • Page 5: Safety Parts Information

    1.5. Safety Parts Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by ( ) in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.
  • Page 6: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...
  • Page 7: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode Caution: This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 790 nm (CD)/405 nm (BD) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings: 1.
  • Page 8: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).
  • Page 9: Handling Precautions For Bd Drive

    2.4. Handling Precautions for BD Drive The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit. Figure 1 Grounding for electrostatic breakdown prevention 2.4.1.
  • Page 10: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with the original ser- vice manual.
  • Page 11: Specifications

    DVD-R/DVD-R DL: DVD Video format , DVD-Video Recording format , AVCHD *2,8 format , JPEG , MP3 DVD-RW: Main unit SA-BT300PX GENERAL DVD Video format , DVD-Video Recording format , AVCHD *1,7 Power supply: AC 110 V to 127 V, format...
  • Page 12 Note: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. Solder: This model uses lead free solder (PbF). Wireless Features: This Model supports wireless surround (e.g:SH-FX70) Refer to their respective original service manuals for *1.
  • Page 13: Location Of Controls And Components

    5 Location of Controls and Components 5.1. Remote Control Key Button Operations Turn the unit on and off Display Home screen of VIERA CAST Select title numbers, etc./Enter numbers or characters (The character buttons may be used when operating VIERA CAST contents [CANCEL]: Cancel Basic playback control buttons...
  • Page 14: Main Unit Key Button Operations

    5.2. Main Unit Key Button Operations Dock for iPod SMART SETUP OPEN CLOSE VOLUME SURROUND OUTPUT Pull open. Dock for iPod SETUP MIC SD CARD SELECTOR TUNE 9 10 Select the source Standby/on switch ( Press to switch the unit from on to standby mode or vice versa. BD/DVD SD IPOD FM AUX D-IN 1 D-IN 2...
  • Page 15: Using Bd-live Or Bonusview In Bd-video

    5.3. Using BD-LIVE or BONUSVIEW in BD-Video...
  • Page 16: Using The Ipod

    Audio/video cannot be recorded or NOTE 32 GB transmitted to iPods via this system. iPod nano 4th generation (video) 8 GB, 16 GB Panasonic makes no warranty for iPod data management. iPod classi iPod classic 120 GB For more information, refer to the...
  • Page 17: Ipod Playback

    iPod Playback This system features two different iPod playback modes. The first of these is EXTENDED mode, for playback of music and video contents. With this mode, you can operate the iPod from the main unit. The second mode is SIMPLE mode, which can be used for playback of three types of contents music, photos, and videos.
  • Page 18: Speaker Connections

    5.5. Speaker Connections...
  • Page 19: Disc, Sd Card And Usb Device Information

    5.6. Disc, SD Card and USB device Information 5.6.1. Disc Playability (Media) Packaged discs This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on the discs and/or packaging. Type of Type of Features...
  • Page 20: Usb Device

    (from 8 MB to 2 GB) AVCHD AVCHD use it on this unit. SDHC Memory Card We recommend using a Panasonic SD card. format Please confirm the latest information on the following (from 4 GB to 32 GB) MPEG2 MPEG2 website.
  • Page 21: About Mp3 & Jpeg Files

    5.7. About MP3 & JPEG files...
  • Page 22: Operating Instructions

    6 Operating Instructions 6.1. Taking out the Disc from BD Drive Unit when disc cannot be ejected by OPEN/CLOSE button 6.1.1. Forcible Disc Eject 6.1.1.1. When the power can be turned off. 1. Turn off the power and press [SKIP FWD] and [OPEN/CLOSE] keys on the front panel simultaneously for 5 seconds. 6.1.1.2.
  • Page 23: Self-diagnosis And Special Mode Setting

    7 Self-Diagnosis and Special Mode Setting 7.1. Service Mode Summary Table Self-Diagnosis Function provides information for error to service personnel by Self-Diagnosis Display when any error has occurred. U**, H** and F** are stored in my memory and held. • You can check latest error code by transmitting [0] [1] of Remote Control in Service Mode. Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnosis display is...
  • Page 24 7.1.1. Error Code Table 1 Error Code Diagnosis contents Description Monitor Display Automatic FL display Remote control code error Display appears when main unit and remote No display controller codes are not matched. is remote controller code of the main unit. Display for 5 seconds.
  • Page 25 7.1.2. Error Code Table 2 Error Code Diagnosis contents Description Monitor Display Automatic FL display SELF Restoration operation Since the power cord fell out during a power No display SELF CHECK CHECK failure or operation, it is under restoration operation. *It will OK, if a display disappears automati- cally.
  • Page 26: Special Mode Setting

    7.2. Special Mode Setting 7.2.1. Service Mode Table 1 Item FL display Key operation Mode name Description Front Key Initialize Mode ll the main unit’s parameters are initialized. Press [STOP], [SKIP FWD] and 1) Unit power-up [OPEN/CLOSE] keys simulta- ----------- 2) FL shows "Hello"...
  • Page 27 7.2.2. Service Mode Table 2 Item FL display Key operation Mode name Description Front Key Demonstration lock/ Ejection of the disc is prohibited. *When lock the tray. When the power is on, press unlock The lock setting is effective until unlocking the [PLAY] and [OPEN/CLOSE] keys tray released...
  • Page 28: Service Mode At Glance

    7.3. Service Mode at glance Service mode setting: While the power is off, press [SKIP FWD] & [PLAY] on main unit follow by [SETUP] on remote control simul- taneously for five second or more. 7.3.1. Service Mode Table 1 Item FL display Key operation Mode name...
  • Page 29 7.3.2. Service Mode Table 2 Item FL display Key operation Mode name Description (Remote controller key) Laser Used Time Check laser used time (hours) of drive. Press [4] [1] in service mode. Indication (******) is the used time display in hour.
  • Page 30 7.3.3. Service Mode Table 3 Item FL display Key operation Mode name Description (Remote controller key) BD/DVD drive last error BD/DVD drive error code display. 1. Error Number is displayed for 5 Press [4] [2] in service mode. seconds. **** 2.
  • Page 31 7.3.4. Service Mode Table 4 Item FL display Key operation Mode name Description (Remote controller key) In case that the maker cannot be 6. Disc maker ID is displayed for 5 identified, display is black out. seconds. 7. Factor of drive error (hexadeci- mal) occurring is left displayed.
  • Page 32 7.3.5. Service Mode Table 5 Item FL display Key operation Mode name Description (Remote controller key) CEC (H) output Check of the CEC terminal high output of Press [5] [5] in service mode. HDMI. CECHOK CECHNG CEC (L) output Check of the CEC terminal low output of Press [5] [6] in service mode.
  • Page 33: Service Mode Table (wireless - E.g. Sh-fx70)

    7.4. Service Mode Table (Wireless - e.g. SH-FX70) By pressing various button combinations on the player and remote control unit, you can activate the various service modes for checking. 7.4.1. Service Mode Table 1 Item Key Operation FL Display Mode Name Description Front Key ID Setting...
  • Page 34 7.4.2. Service Mode Table 2 Item Key Operation FL Display Mode Name Description Front Key (Display 1) RF Channel RF Channel 1 Display* Main set is in AUX mode. Selection Display FL Display sequence: Display 1 (Display 2) Press and hold [STOP] button on the main unit, and [4] button on the remote control unit.
  • Page 35: Service Fixture & Tools

    8 Service Fixture & Tools 8.1. Service Tools and Equipment Prepare service tools before process service position. Service Tools Remarks D-Amp P.C.B. (CN8502) - SMPS P.C.B. (*JW1) REXX0725 (8P cable) Main P.C.B. (CN503) - D-Amp P.C.B. (CN8501) RFKZBT200E2 (22P FFC) Main P.C.B.
  • Page 36: Disassembly And Assembly Instructions

    9 Disassembly and Assembly Instructions “ATTENTION SERVICER” Be careful when disassembling and servicing. Some chassis components may have sharp edges. Special Note: 1. This section describes the disassembly procedures for all the major printed circuit boards and main components. 2. Before the disassembly process was carried out, do take special note that all safety precautions are to be carried out.
  • Page 37: Disassembly Flow Chart

    9.1. Disassembly Flow Chart 9.3. Top Cabinet 9.5. Rear Panel 9.19. AC Inlet P.C.B. 9.13 Main P.C.B. 9.15 D-Amp P.C.B. 9.6. Front Panel Assembly 9.16 Audio Amplifier Drive 9.7 Panel & Power Button IC (IC8001) P.C.B. 9.17 Audio Amplifier Drive 9.8 Setup Mic P.C.B.
  • Page 38: Main Components And P.c.b. Locations

    9.2. Main Components and P.C.B. Locations...
  • Page 39: Disassembly Of Top Cabinet

    9.3. Disassembly of Top Cabinet Step 1 Remove 4 screws. Step 1 Remove 2 screws. Step 2 Remove 3 screws at the rear panel. Step 2 Detach 19P FFC on Wireless Adapter P.C.B. at connec- Step 3 Lift up the back part of the top cabinet and remove it in tor (CN6301).
  • Page 40: Disassembly Of Rear Panel

    Caution: During assembling, ensure that Voltage SW Bar- rier is inserted into the Voltage Selector P.C.B.. Step 3 Lift up Voltage Selector P.C.B.. Step 5 Desolder blue & white wire’s pins on Voltage Selector P.C.B.. Step 6 Remove Voltage Selector P.C.B.. 9.5.
  • Page 41: Disassembly Of Front Panel Assembly

    Step 4 Remove 1 screw on Wireless Adapter P.C.B.. 9.6. Disassembly of Front Panel Step 5 Release 1 locator of wireless barrier. Assembly • Follow (Step 1) to (Step 3) of Item 9.3. Step 6 Slightly slide wireless barrier in the direction of arrow. Step 7 Detach the wireless barrier.
  • Page 42: Disassembly Of Panel & Power Button P.c.b

    9.7. Disassembly of Panel & Power Button P.C.B. • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 8) of Item 9.6. Step 6 Slightly detach the front panel assembly. Step 1 Remove the volume knob. Step 2 Remove 3 screws (without washer) on Panel P.C.B..
  • Page 43: Disassembly Of Setup Mic P.c.b

    Step 8 Remove 2 screws on the Power Button P.C.B.. Step 4 Remove earth spring on Panel P.C.B.. Step 9 Remove 1 screw on coil barrier. Step 5 Remove USB earth spring on Panel P.C.B.. Step 10 Remove coil barrier. Caution: Keep both earth spring &...
  • Page 44: Disassembly Of Sd P.c.b

    9.9. Disassembly of SD P.C.B. • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 8) of Item 9.6. Step 1 Release Shaft B of tray lid from hole B. Step 1 Desolder ground wire. Caution: During assembling, solder back the ground wire.
  • Page 45: Disassembly Of Ipod P.c.b

    Step 2 Lift the door spring of Shaft A in the direction of arrow (1). Step 3 Release Shaft A of tray lid in the direction of arrow (2). Step 1 Pull out the iPod Cradle Unit as arrow shown. Step 2 Remove connector cover.
  • Page 46: Disassembly Of Bd Drive

    Step 5 Push and slide the Cradle Lid downwards to remove Step 10 Remove 2 screws on iPod P.C.B.. Cradle Lid as arrow shown. Step 11 Remove iPod P.C.B.. Step 6 Remove the iPod Cradle Assembly in the direction of arrow shown.
  • Page 47: Disassembly Of Main P.c.b

    Step 3 Remove 4 screws at BD Drive. Step 4 Remove BD Drive. Caution: During fixing 18P FFC to BD Drive, ensure that Step 3 Detach 10P FFC at the connector (CN801) on Main non-wooven tapes are properly pasted over 18P FFC onto P.C.B..
  • Page 48: Disassembly Of Digital P.c.b

    Step 13 Detach 4P cable at the connector (P55003) on Main P.C.B.. Step 14 Detach 30P FFC at the connector (CN803) on Main P.C.B.. Step 15 Remove Main P.C.B.. 9.14. Disassembly of Digital P.C.B. Step 9 Detach 11P cable at the connector (CN5802) on SMPS •...
  • Page 49: Disassembly Of D-amp P.c.b

    Step 2 Lift up non-wooven tape. Step 11 Remove Digital P.C.B.. Step 3 Remove Digital P.C.B. shield plate. Caution: During assembling, ensure the Digital P.C.B. is seated property at the locators. 9.15. Disassembly of D-Amp P.C.B. • Follow (Step 1) to (Step 3) of Item 9.3. •...
  • Page 50: Replacement Of Audio Amplifier Driver Ic (ic8001)

    Step 3 Upset the Main P.C.B.. Step 4 Detach 8P FFC at the connector (CN5802) on D-Amp P.C.B.. Step 5 Detach 3P cable at the connector (CN5805) on D-Amp P.C.B.. Caution: During assembling, ensure that the D-Amp P.C.B is seated properly at the locators. 9.16.
  • Page 51: Replacement Of Audio Amplifier Driver Ic (ic8002)

    Step 3 Apply the radiation rubber to the Audio Amplifier Driver IC (IC8001). Step 4 Install the heatsink unit A on D-Amp P.C.B. in the direc- Step 2 Remove the heatsink unit A. tion of arrow. Step 3 Desolder pins of Audio Amplifier Driver IC (IC8001). Step 4 Remove Audio Amplifier Driver IC (IC8001) from D-Amp P.C.B.
  • Page 52 9.17.2. Assembly of Driver IC (IC8002) Step 1 Mount the Audio Amplifier Driver IC (IC8002) on to the Step 1 Remove 3 screws at the solder side of D-Amp P.C.B.. D-Amp P.C.B.. Caution: Ensure that the pins of Audio Amplifier Driver IC (IC8002) is positioned correctly on D-Amp P.C.B..
  • Page 53: Replacement Of Regulator Transistor (q8026)

    9.18. Replacement Regulator 9.18.2. Assembly of Regulator Transistor (Q8026) Transistor (Q8026) 9.18.1. Disassembly of Regulator Transis- tor (Q8026) • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 3) of Item 9.13. • Follow (Step 1) to (Step 7) of Item 9.15. Step 1 Install Regulator Transistor (Q8026) on to the heatsink extrusion.
  • Page 54: Disassembly Of Smps P.c.b

    Caution: During assembling, ensure that the AC Inlet P.C.B is seated properly at the locators. 9.20. Disassembly of SMPS P.C.B. • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 6) of Item 9.6. Step 1 Remove 2 screws at the AC Inlet shield plate unit.
  • Page 55: Replacement Of Switching Regulator Ic (ic5701)

    9.21. Replacement of Switching Reg- 9.21.2. Assembly of Switching Regulator IC (IC5701) ulator IC (IC5701) 9.21.1. Disassembly of Switching Regula- tor IC (IC5701) • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 6) of Item 9.6. •...
  • Page 56 9.22.2. Assembly of Rectifier Diode (D5702) Step 1 Apply grease to the heatsink unit B. Step 2 Fix and screw the rectifier diode (D5702) to the heatsink Step 1 Desolder pins of the rectifier diode (D5702) on the sol- unit B. der side of SMPS P.C.B..
  • Page 57: Replacement Of Regulator Diode (d5801)

    Caution: Ensure pins of the rectifier diode (D5702) are 9.23.2. Assembly of Regulator Diode properly seated and soldered on SMPS P.C.B.. (D5801) 9.23. Replacement of Regulator Diode (D5801) 9.23.1. Disassembly of Regulator Diode (D5801) • Follow (Step 1) to (Step 3) of Item 9.3. •...
  • Page 58: Replacement Of Regulator Diode (d5803)

    9.24.2. Assembly of Regulator Diode (D5802) Step 1 Apply grease to the heatsink unit C. Step 1 Desolder pins of the regulator diode (D5802) on the sol- Step 2 Mount the regulator diode (D5802) on to SMPS P.C.B.. der side of SMPS P.C.B.. Step 3 Fix and screw the regulator diode (D5802) to the heat- sink unit C.
  • Page 59: Disassembly Of Wireless Adapter P.c.b

    Step 1 Apply grease to the heatsink unit C. Step 2 Mount the regulator diode (D5803) on to SMPS P.C.B.. Step 3 Fix and screw the regulator diode (D5803) to the heat- sink unit C. Caution: Ensure the regulator diode (D5803) is tightly screwed to the heatsink unit C.
  • Page 60: Disassembly Of Tuner P.c.b

    9.27. Disassembly of Tuner P.C.B. 9.28. Disassembly of BD Drive • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 3) of Item 9.3. • Follow (Step 1) to (Step 6) of Item 9.6. •...
  • Page 61 9.28.2. Tray Step 5 Insert the Eject Pin into the Tray as below figure, lift up Step 1 Perform the step “9.28.1. Upper Base Ass’y. the lever using the Eject Pin while pushing the dotted point of Step 2 Insert the Eject Pin into the hole of the bottom side, and the Tray.
  • Page 62 9.28.4. Slide Cam Step 8 Remove the Slide Cam. 9.28.5. Mid Gear, Drive Gear and Loading Motor Step 1 Perform the step “9.28.3. Pulley Gear, Belt”. Step 2 Remove the Sheet. Step 3 Disconnect the 3 FFCs. Step 4 Remove the 2 Screws (B) and the Angle. Step 5 Peel off Copper Sheet from FFC (A) and remove the Drive P.C.B..
  • Page 63 9.28.6. Grease...
  • Page 64 9.28.7. How to Clean the Lens of Optical Pick-UP Follow the “9.2.1. Upper Base Ass’y.
  • Page 65: Service Position

    10 Service Position Step 3 Remove 2 screws on Main P.C.B.. Step 4 Lift up nonwoven tape. 10.1. Checking & Servicing of Main P.C.B. 10.1.1. Checking & servicing Side A of Main P.C.B. Step 5 Detach 10P FFC at the connector (CN801) on Main P.C.B..
  • Page 66: Checking & Servicing Of Smps P.c.b

    Caution: Insulated material is required to insulate Main P.C.B from other parts. 10.2. Checking & Servicing of SMPS P.C.B. Step 9 Put aside Main P.C.B.. Step 10 Attach with 22P extension FFC (Part No. Step 1 Release the tabs at the bottom of the front panel assem- RFKZBT200E2) from CN503 to CN8501.
  • Page 67: Checking & Servicing Of Digital P.c.b

    Step 9 Upset the SMPS P.C.B.. Step 10 Connect 20P FFC to the connector (CN806) on SMPS Step 6 Slightly detach the front panel assembly. P.C.B.. Step 11 Process to check and service SMPS P.C.B.. Caution: Insulated material is required to insulate SMPS P.C.B.
  • Page 68 Step 4 Remove 1 screw on wireless barrier. Step 5 Remove wireless barrier. Step 5 Process to check & service side B of Digital P.C.B.. 10.3.2. Checking & servicing side A of Dig- ital P.C.B. • Follow (Step 1) to (Step 11) of Item 10.1.2 •...
  • Page 69: Checking And Servicing Of D-amp P.c.b

    Step 1 Put aside Main P.C.B.. Step 2 Process to check & service side B of D-Amp P.C.B.. 10.4.2. Checking & servicing side A of D- Amp P.C.B. • Follow (Step 1) to (Step 11) of Item 10.1.2 Step 8 Remove 2 Main P.C.B. angles. •...
  • Page 70 Step 10 Position D-Amp P.C.B. according to diagram shown. Step 11 Connect fan unit to connector (CN8505) on D-Amp P.C.B. Step 12 Process to check & service side A of D-Amp P.C.B. Caution: Insulated material is required to insulate P.C.B. from other parts.
  • Page 71: Caution For Replacing Parts

    Perform playback for one minute using the RAM disc. No abnormality should be seen in the picture, sound or operation. *Panasonic DVD-RAM disc should be used when recording and play- back. Perform playback for one minute using the BD-Video disc.
  • Page 72: Voltage & Waveform Chart

    CD PLAY STANDBY IC101 REF NO. MODE CD PLAY STANDBY REF NO. IC101 MODE CD PLAY STANDBY IC102 REF NO. MODE CD PLAY STANDBY IC104 REF NO. MODE CD PLAY STANDBY IC105 REF NO. MODE CD PLAY STANDBY SA-BT300PX MAIN P.C.B.
  • Page 73: Main P.c.b. (2/4)

    IC1101 REF NO. MODE CD PLAY STANDBY IC1102 REF NO. MODE CD PLAY -7.2 STANDBY -7.2 REF NO. IC1451 MODE CD PLAY STANDBY IC2101 REF NO. MODE CD PLAY STANDBY IC2101 REF NO. MODE CD PLAY STANDBY SA-BT300PX MAIN P.C.B.
  • Page 74: Main P.c.b. (3/4)

    -7.2 IC3103 REF NO. MODE CD PLAY -7.2 STANDBY -7.2 IC3104 REF NO. MODE CD PLAY -7.2 STANDBY -7.2 IC3105 REF NO. MODE CD PLAY -7.2 STANDBY -7.2 IC3106 REF NO. MODE CD PLAY -7.2 STANDBY -7.2 SA-BT300PX MAIN P.C.B.
  • Page 75: Main P.c.b. (4/4)

    MODE CD PLAY -4.8 -4.8 -4.8 -4.8 -4.8 -4.8 STANDBY Q7001 Q7002 Q7003 REF NO. MODE CD PLAY 11.1 11.5 11.5 20.2 22.8 11.5 11.5 21.6 22.8 STANDBY 11.1 11.5 11.5 20.2 22.8 11.5 11.5 21.6 22.8 SA-BT300PX MAIN P.C.B.
  • Page 76: Panel P.c.b

    -25.6 -25.7 -25.7 -16.4 -26.5 -14.2 -16.5 23.7 -23.6 -23.6 -23.6 -23.6 -23.6 -23.6 -23.6 IC6001 REF NO. MODE CD PLAY -23.5 -23.5 -3.3 STANDBY -23.6 -23.6 -3.3 Q6001 Q6003 Q6004 REF NO. MODE CD PLAY STANDBY SA-BT300PX PANEL P.C.B.
  • Page 77: D-amp P.c.b. (1/2)

    STANDBY 37.5 37.5 -36.8 -36.8 -36.8 -36.8 37.5 37.5 -36.8 Q8202 Q8301 Q8302 REF NO. MODE CD PLAY -36.8 -36.8 -36.8 37.5 37.5 37.5 37.5 37.5 37.5 STANDBY -36.8 -36.8 -36.8 37.5 37.5 37.5 37.5 37.5 37.5 SA-BT300PX D-AMP P.C.B.
  • Page 78: D-amp P.c.b. (2/2)

    -5.2 2.55 STANDBY -5.3 -5.2 2.55 SA-BT300PX D-AMP P.C.B. 11.8. Setup Mic P.C.B. IC6501 REF NO. MODE CD PLAY -7.2 STANDBY -7.2 Q6501 Q6502 Q6503 Q6504 REF NO. MODE CD PLAY -4.8 -4.8 STANDBY -4.8 -4.8 SA-BT300PX SETUP MIC P.C.B.
  • Page 79: Smps P.c.b

    -2.1 -33.6 STANDBY -2.1 -33.6 IC5899 REF NO. MODE CD PLAY STANDBY Q5720 Q5861 Q5862 Q5863 Q5898 REF NO. MODE CD PLAY -6.2 -5.7 -6.3 -36.4 STANDBY -6.2 -5.7 -6.3 -36.4 Q5899 REF NO. MODE CD PLAY STANDBY SA-BT300PX SMPS P.C.B.
  • Page 80: Waveform Table

    11.10. Waveform Table 3.2Vp-p(50nsec/div) 2.2Vp-p(50nsec/div) 5.6Vp-p(200usec/div) 4.4Vp-p(200usec/div) 1.2Vp-p(200usec/div) 1.5Vp-p(500nsec/div) 0.2Vp-p(500usec/div) 4Vp-p(200usec/div) 10.4Vp-p(200usec/div) 1.5Vp-p(200usec/div) 7.6Vp-p(200usec/div) 1.5Vp-p(500nsec/div) 1.4Vp-p(2usec/div) 5.6Vp-p(2usec/div) 1.9Vp-p(200usec/div)
  • Page 81: Illustration Of Ics, Transistor And Diode

    12 Illustration of ICs, Transistor and Diode C0ABBA000159 (8p) C0GBM0000007 (24p) RFKB4504B (48p) RFKB4550A-J C0ABBB000189 (8p) C0FBBK000069 (28p) MN864704AKP (96p) C0ABBB000125 (8p) C0JBAZ002843 (30p) MFI341S2161 (20p) C0JBAB000902 (14p) C0DBAYY00274 (30p) No.1 C1CB00002965 (48p) C1AB00003097 (32p) C0FBAK000026 (16p) C0HBB0000057 (44p) C0DBAYY00333 (20p) C0JBAR000300 (16p) No.1 RFKWMBT300PX (100p)
  • Page 83: Block Diagram

    TO DIGITAL (VIDEO OUT) 40 OPTIN SEL CN803 P58004 XMPREQ CN803 P58004 P58004 CN803 XINTP OUT TO DIGITAL (REGULATOR) 88 PW GOOD CN803 P58004 XINTM P58000 CN506 FROM DIGITAL (AUDIO IO) 85 BP1 ZFLAG XINTM OUT SA-BT300PX SYSTEM CONTROL BLOCK DIAGRAM...
  • Page 84: Audio

    95 INR1 [MIX R] MULTIPLEXER P58000 CN506 96 INL1 [MIX L] 2 Y2 SB VOL CLK 15 X2 DATA SB VOL DATA 11 X3 FROM QR322 SYSTEM CONTROL 4 Y3 INVERTER CBCH SW 5 Y1 QR321 INVERTER SB CNT SA-BT300PX AUDIO BLOCK DIAGRAM...
  • Page 85: D-amp

    DC DETECT DC DETECT SENSOR Q8007, Q8008, QR8005, QR8006 Q8009 CN503 CN8501 DC DETECT 5 OS CN8505 CTRL FAN MOTOR DRIVE CN8505 IC8004 C0ZBZ0001675 TEMPERATURE Q8006 SENSOR CN8505 FAN LOCK DETECT 5 OS CTRL CN503 CN8501 SA-BT300PX D-AMP BLOCK DIAGRAM...
  • Page 86: Smps

    CN5802 -13V -13V CURRENT LIMITING D5802 SWITCH CN8502 +30V SENSE 7, 8 D5801 CN8502 -30V SENSE 3, 4 D5807 Q8026 REGULATOR IC5801 C0DABFC00002 SHUNT REGULATOR PC5720 Q5861, Q5863 CN7001 CN5802 FEED BACK FROM SWITCH SYSTEM CONTROL SA-BT300PX SMPS BLOCK DIAGRAM...
  • Page 87: Wiring Connection Diagram

    FOR DEBUG P51601 DIGITAL P.C.B. (SIDE:B) JK56001 (SIDE:B) POWER BUTTON P.C.B. DOCK FOR iPod HDMI (SOLDER SIDE) (AV OUT) CN1001 P51302 CN6101 JK59001 CN1002 FOR SOFTWARE FOR SOFTWARE NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT300PX WIRING CONNECTION...
  • Page 89: Schematic Diagram Notes

    15 Schematic Diagram Notes • Voltage and signal line :+B signal line • This schematic diagram may be modified at any time :-B signal line with the development of new technology. :Audio output signal line Notes: :Video output signal line :BD/DVD Audio input signal line S6001: Stop switch (...
  • Page 91: Schematic Diagram

    C2019 16V47 65 64 60 59 C2020 Q353 B1GFGCAA0001 SWITCH Q354 B1ABGC000005 SWITCH C2015 220P R361 R360 R359 1.2K 1.2K 1.2K C2016 220P WS_CNT C2310 0.022 C2014 50V4.7 C2011 TO MAIN SECTION (2/8) TO MAIN SECTION (5/8) SA-BT300PX MAIN CIRCUIT...
  • Page 92 C2111 BP1DMIXL R2102 5.6K JC_P_ON_H C2210 V_OUT_MUTE K2401 C2211 R2202 5.6K BP1DMIXR AGND R2905 RECOUT_L AIN_L K2301 AGND RECOUT_R R2906 AIN_R SD_L TO MAIN JC_P_ON_H SECTION (3/8) TO MAIN V_OUT_MUTE SECTION (1/8) BP1_ZFLAG TO MAIN SECTION (6/8) SA-BT300PX MAIN CIRCUIT...
  • Page 93 LB1101 J0JYC0000070 iPod_5V (CN1002) R1127 C533 DOCK_L IN SCHEMATIC LB1109 C1108 DOCK_AGND DIAGRAM - 33 R1128 C532 DOCK_R iPod_DET LB1103 iPod_DET VGND VIDEO LB1102 VGND TO MAIN C1133 C1132 C1131 C1134 SECTION (7/8) 1000P 1000P 1000P 1000P SA-BT300PX MAIN CIRCUIT...
  • Page 94 C7005 T7001 35V47 Q7001 G4D1A0000117 C7055 B1BABK000001 SWITCHING TRANSFORMER POWER SAVE CONTROL C7056 D7006 470P B0JAME000029 CONT C7054 LB7001 J0JBC0000041 C7004 LB7002 D7005 J0JBC0000041 6.3V220 B0JCMD000010 TO MAIN SECTION (3/8) R7006 C7070 3900P TO MAIN SECTION (8/8) SA-BT300PX MAIN CIRCUIT...
  • Page 95 2.2K 2.2K AUXR R820 R2279 R2280 C2277 R2275 C2278 50V1 1.8K AUX(TV) C2280 100P HPOUTR FRVOLOUT R2288 3.3K AUXL R821 L CH R2276 R2216 R2116 C822 C824 AGND 220P 220P AGND FLFIN FRFIN TO MAIN SECTION (6/8) SA-BT300PX MAIN CIRCUIT...
  • Page 96 C0ABBB000189 C0ABBB000189 OP-AMP OP-AMP OP-AMP -VCC -VCC -VCC R3118 R3122 C3130 R3133 C3128 C3119 C3120 C3125 C3126 C3122 R3128 1000P 1000P R3119 1000P 1000P R3123 R3129 C3116 R3130 R3131 TO MAIN SECTION (7/8) TO MAIN SECTION (5/8) SA-BT300PX MAIN CIRCUIT...
  • Page 97 C336 220P SB_VOL_DATA R332 SBR_VOLOUT C306 R307 R309 C309 3.9K 3.3K D3R3V C351 WS_ON_H R352 Q351 B1ADCE000012 TO MAIN MUTING CONTROL SECTION (6/8) R351 R354 A-7V R353 R355 AGND R357 R358 1.2K Q352 1.2K B1GFGCAA0001 MUTING WS_CNT SA-BT300PX MAIN CIRCUIT...
  • Page 98 R7022 16V220 6.3V1200 B0JCPG000005 0.015 R7031 D7012 B0JCPG000005 C7021 10V100 C7079 -13V L7012 R7061 G0A220GA0002 D7020 MA2J1110GL 2.7K D7021 MA2J1110GL C7019 C7058 6.3V1000 D7038 MAZ8130GHL L7013 CN7002 G0A220GA0002 D12V DIGITAL(BP1 FEP) C7020 DGND 16V470 CIRCUIT (P55003) DGND SA-BT300PX MAIN CIRCUIT...
  • Page 99: Panel Circuit

    LED CONTROL FL_GND PLAY HEADPHONE R6021 R6022 D6003 2.7K B3ABA0000795 Q6003 C6006 LED2 B1GBCFGN0018 RL6002* CN6001 LED DRIVE L6007 R6024 J0JBC0000014 C6007 POWER BUTTON L6005 CIRCUIT (CN6101) DGND KEY1 IN SCHEMATIC KEY1 DIAGRAM - 32 L6006 J0JBC0000014 SA-BT300PX PANEL CIRCUIT...
  • Page 100: Tuner, Power Button & Setup Mic Circuit

    2.2K C0ABBB000125 OP-AMP R6516 1.8K R6518 4.7K R6512 Q6503 B1GDCFGA0018 MUTING CONTROL C6511 150P R6514 D6502 R6502 C6510 R6515 MA2J1110GL 100K R6511 Q6501 2.2K B1ABEB000002 MUTING R6503 C6512 C6509 R6513 C6508 SA-BT300PX TUNER / POWER BUTTON / SETUP MIC CIRCUIT...
  • Page 101: Sd, Ipod & Wireless Adapter Circuit

    VIDEO_COMP IN SCHEMATIC DPORT_AGND D GNDREM SENSE DIAGRAM - 25 R1002 DOCK_R OUT IN - L IN - R iPod DET VGND OUT_L VIDEO OUT_R L1009 J0JHC0000107 VGND AUDIO_RETURN L1008 J0JHC0000107 iPod_DET SA-BT300PX SD / iPod / WIRELESS ADAPTER CIRCUIT...
  • Page 102: D-amp Circuit

    Q8014 R8033 C8027 MAZ8120GML 16V10 B1ADNB000003 POWER SUPPLY C8049 R8057 2.2K R8031 C8022 5600P C8026 R8035 C8023 D8006 R8032 1.8M B0ACCK000005 50V1 Q8009 B1ABCF000176 D8007 FAN MOTOR DRIVE B0ACCK000005 TO D-AMP SECTION (2/6) TO D-AMP SECTION (4/6) SA-BT300PX D-AMP CIRCUIT...
  • Page 103 C8406 11 12 VS1_1 HO1_1 HO2_1 Q8002 D8402 B1HBDCA00001 B0ACCK000005 C8306 R8308 R8411 MUTING D8302 B0ACCK000005 R8419 100K R8311 D8401 R8310 B0ACCK000005 R8407 R8309 D8301 B0ACCK000005 R8312 TO D-AMP R8322 SECTION (1/6) VS2_1 TO D-AMP SECTION (5/6) SA-BT300PX D-AMP CIRCUIT...
  • Page 104 0.47 2.7K 2.7K C8308 L8701 LO2_1 G0B9R5K00003 R8314 R8415 C8407 R8416 R8420 Q8401 0.47 2.7K 2.7K C8408 L8801 B1CBRK000001 G0B9R5K00003 AMPLIFIER D8411 B0HCMM000019 R8413 HO1_1 D8412 B0HCMM000019 Q8402 B1CBRK000001 AMPLIFIER VS1_1 LO1_1 R8414 TO D-AMP SECTION (6/6) SA-BT300PX D-AMP CIRCUIT...
  • Page 105 HEX INVERTER R8901 8002 C8030 C8038 0.01 C8031 0.01 R8041 D8008 D8009 B0ACCK000005 B0ACCK000005 C8032 100P R8042 X8101 R8038 H2A5003A0066 C8033 R8065 100P C8034 R8063 100P X8102 R8039 C8036 H2A4643A0068 R8066 C8035 100P TO D-AMP SECTION (5/6) C8037 SA-BT300PX D-AMP CIRCUIT...
  • Page 106 C8008 R8707 16V10 C8806 R8808 11 12 VS1_2 HO1_2 HO2_2 Q8004 B1HBDCA00001 D8802 B0ACCK000005 MUTING R8811 C8706 R8708 D8702 B0ACCK000005 R8819 100K R8711 D8801 B0ACCK000005 R8807 R8710 R8709 D8701 B0ACCK000005 R8712 R8722 VS2_2 TO D-AMP SECTION (4/6) SA-BT300PX D-AMP CIRCUIT...
  • Page 107 R8814 R8715 Q8017 C8707 R8716 R8720 B1ABCF000176 0.47 Q8701 2.7K 2.7K C8708 DC DETECT B1CBRK000001 Q8016 AMPLIFIER D8711 B0HCMM000019 B1ABCF000176 R8813 DC DETECT HO1_2 D8712 C8061 B0HCMM000019 D8010 R8047 R8048 B0ACCK000005 Q8702 B1CBRK000001 AMPLIFIER VS2_2 LO2_2 R8714 SA-BT300PX D-AMP CIRCUIT...
  • Page 108: Smps Circuit

    IN SCHEMATIC IC5801 -13V DCDET DIAGRAM - 26 R5729 C0DABFC00002 DCDET SYS_GND C5818 SHUNT REGULATOR SYS_GND SYS5V Q5863 SYS6V R5728 SYNC B1ABGC000001 R5805 SYNC 6.8K SWITCH C5896 Q5861 R5817 R5819 B1ADCE000012 2.2K R5861 C5869 SWITCH 0.01 100K R5818 SA-BT300PX SMPS CIRCUIT...
  • Page 109 TL2* 470P C5799 AC INLET CIRCUIT 400V6.8 IN SCHEMATIC T1.6A 250V DIAGRAM - 42 TL1* RY701 K6B1AEA00003 TL3* D5899 MA2J1110GL VOLTAGE SELECTOR CIRCUIT R5820 2.7K Q5899 IN SCHEMATIC PCONT B1ABCF000176 DIAGRAM - 42 TL4* RELAY DRIVE R5899 SA-BT300PX SMPS CIRCUIT...
  • Page 110: Ac Inlet & Voltage Selector Circuit

    110V ~ 127V / 220V ~ 240V 3.9M 50Hz / 60Hz DIAGRAM - 41 TL20* TH5702 DZ5701 D4CAA5R10001 ERZV10V511CS C5704 F1BAF471A013 470P ZJ5701 VOLTAGE SELECTOR CIRCUIT S5701 VOLT ADJ TL30* SMPS CIRCUIT IN SCHEMATIC DIAGRAM - 41 TL31* SA-BT300PX AC INLET / VOLTAGE SELECTOR CIRCUIT...
  • Page 111: Printed Circuit Board

    C2114 C2512 C7063 R2214 R2506 C2217 R2321 C7058 C2511 C230 C2313 R7022 R2505 D7012 D7020 R3114 R2312 R2184 R2283 R2183 C2230 C2130 D7011 C3111 Q7002 C7061 R2289 R7019 R202 R2270 R203 R7052 R201 3333A-4 3333A-4 (SIDE A) SA-BT300PX MAIN P.C.B.
  • Page 112 D501 R7030 R7025 Q2101 C2294 IC2102 R2179 R2180 C7007 1 2 3 C7077 R7026 CN503 QR7051 CN7002 Q7050 6 5 4 C2194 IC501 R2175 R7053 R2176 R7051 C520 C2179 R7050 C2178 R2174 D500 3333A-4 3333A-4 (SIDE B) SA-BT300PX MAIN P.C.B.
  • Page 113: Tuner, Panel, Power Button, Setup Mic & Sd P.c.b

    R6519 R6508 W503 C6508 Q6503 LB6213 Q6502 C6513 C6511 P6201 D6501 R6507 R6515 R6518 C6510 R6510 R6502 R6516 CN6501 R6517 D6503 Q6504 3334AD 3334AD SD CARD NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT300PX TUNER/PANEL/POWER BUTTON/SETUP MIC/SD P.C.B.
  • Page 114: Ipod, Wireless Adapter, Ac Inlet & Voltage Selector P.c.b

    K5701 TL20* TL30* TL31* 220V-240V W5782 50/60Hz ZJ5701 W5783 3337CB 3337CB CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT300PX iPod/WIRELESS ADAPTER/AC INLET/VOLTAGE SELECTOR P.C.B.
  • Page 115: D-amp P.c.b

    C8408 R8418 R8216 R8616 R8515 R8816 IC8008 R8120 C8708 R8716 C8208 D8412 R8417 R8220 R8315 R8415 R8215 R8520 R8620 R8815 R8057 R8420 R8318 D8611 R8516 C8040 R8317 R8615 R8055 D8612 R8218 R8118 C8110 3336A 3336A (SIDE A) SA-BT300PX D-AMP P.C.B.
  • Page 116 C8607 Q8014 C8307 C8407 Q8015 10-SR- SURROUND C8207 11-SL+ L8301 C8048 12-SL- R8005 13-SBR+ CN8501 D8111 L8201 R8901 L8101 SURROUND 14-SBR- 3336A 3336A BACK 15-SBL+ 16-SBL- (SIDE B) NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT300PX D-AMP P.C.B.
  • Page 117: Smps P.c.b

    D5793 W5729 T1.6A C5798 250V Q5899 Q5898 W5731 R5704 R5706 K5742 IC5799 TL1* D5701 RY701 R5795 PC5799 R5897 C5795 D5730 R5821 TL3* TL2* R5797 C5897 W5733 PC5702 TL4* NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT300PX SMPS P.C.B.
  • Page 119: Terminal Function Of Ics

    18 Terminal Function of ICs 18.1. IC6001(C0HBB0000057): IC FL Driver Terminal Name Function O No Connection No Connection No Connection No Connection Oscillator Input No Connection Data Input Clock Input Serial Interface Strobe 10 NC No Connection 11 NC No Connection 12 GND 13 VCC Power Supply (+5V)
  • Page 121: Exploded View And Replacement Parts List

    (SETUP MIC P.C.B.) JK6501 CN6101 (POWER 18-1 BUTTON P6001 *(SD SUPPORT P.C.B.) P.C.B.) 18-1 CN6001 CN6201 IR6001 (SD P.C.B.) P6201 VR6001 (PANEL P.C.B.) JK6001 DP6001 19-1 19-1 CN1001 CN1002 (iPod P.C.B.) SA-BT300PX-K NOTE: " * " PART IS NOT SUPPLIED. CABINET DRAWINGS...
  • Page 122 *HEATSINK B *TL20 CN6302 (WIRELESS *HEATSINK ADAPTER T5701 P.C.B.) CN6301 *HEATSINK C T5751 *JW1 *TL1 CN5802 *TL4 *TL2 ZJ5801 ZJ5803 *TL3 (SMPS P.C.B.) SA-BT300PX-K CABINET DRAWINGS NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY.
  • Page 123 19.1.2. Packaging ACCESSORIES BAG REMOTE CONTROL A1-1 R/C BATTERY COVER AC CORD OI BOOK SA-BT300PX FM INDOOR ANTENNA SB-BT300P9 VIDEO CABLE AUTO SPEAKER SETUP MICROPHONE SPEAKER CABLE STICKERS F R O N T AM LOOP ANTENNA A9 SCREW POLYFOAM (FRONT)
  • Page 124 19.1.3. BD Mechanism Cabinet...
  • Page 125 19.1.4. Mechanical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks RYF0862-K1 TRAY LID UNIT Description 19-1 RMG0796-K LID CUSHION CABINET RYQ0701-Q FL ORNAMENT UNIT CHASSIS RGK2178-K PANEL ORNAMENT L6FAYYYH0079 FAN UNIT...
  • Page 126 Safety Ref. Part No. Part Name & Qty Remarks Description RMCX0061 USB SPRING RMG0786-H RADIATION RUBBER RMKX0127-K1 TRANSMITTER CHASSIS RMKX0155C-3 BOTTOM CHASSIS RMNX0151 LED HOLDER RMNX0306 SMPS PCB INSULA- RMNX0252-K CRADLE KEY RMNX0253 LED HOLDER RMNX0260 FL HOLDER RXQ1742 SHIELD UNIT RMQX0233-K FAN COVER...
  • Page 127: Electrical Replacement Part List

    19.2. Electrical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks IC3102 C0ABBB000189 Description IC3103 C0ABBB000189 PRINTED CIRCUIT IC3104 C0ABBB000189 BOARDS IC3105 C0ABBB000189 PCB1 RFKB4501A-J MAIN P.C.B (RTL) IC3106 C0ABBB000189...
  • Page 128 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description Q5861 B1ADCE000012 TRANSISTOR D501 MA2J1110GL DIODE Q5862 B1ABCF000176 TRANSISTOR D2601 MA2J1110GL DIODE Q5863 B1ABGC000001 TRANSISTOR D2602 MA2J1110GL DIODE Q5898 B1ABCF000176 TRANSISTOR D2603 MA2J1110GL...
  • Page 129 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description D8013 MAZ8075GML DIODE CN6301 K1MN19AA0004 19P CONNECTOR D8014 MAZ8120GML DIODE CN6302 K1MY26A00001 CONNECTOR (WIRELESS) D8016 MAZ8110GML DIODE CN6351 K1MN10BA0004 10P CONNECTOR D8017 B0ACCK000005 DIODE...
  • Page 130 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description LB813 J0JBC0000014 INDUCTOR ZA5701 K3GE1ZZ00001 FUSE HOLDER LB814 J0JBC0000014 INDUCTOR ZA5702 K3GE1ZZ00001 FUSE HOLDER LB815 J0JBC0000014 INDUCTOR LB817 J0JBC0000014 INDUCTOR IC PROTECTORS LB818 J0JBC0000014...
  • Page 131 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R101 D0GB101JA008 1/16W R186 D0GB472JA008 4.7K 1/16W R102 D0GB101JA008 1/16W R188 D0GB103JA008 1/16W R103 D0GB101JA008 1/16W R189 D0GBR00JA008 1/16W R104 D0GB101JA008 1/16W R190...
  • Page 132 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R352 D0GB471JA008 1/16W R1113 D0GB101JA008 1/16W R353 D0GB223JA008 1/16W R1114 D0GB103JA008 1/16W R354 D0GB103JA008 1/16W R1115 D0GB103JA008 1/16W R355 D0GB223JA008 1/16W R1116 D0GB103JA008...
  • Page 133 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R2273 D0GB273JA008 1/16W R3111 D0GB103JA008 1/16W R2274 D0GB392JA008 3.9K 1/16W R3112 D0GB103JA008 1/16W R2275 D0GB182JA008 1.8K 1/16W R3113 D0GB103JA008 1/16W R2276 D0GB223JA008 1/16W...
  • Page 134 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R5806 D0GB153JA008 1/16W R6510 D0GB222JA008 2.2K 1/16W R5807 ERJ6GEYJ331V 1/8W R6511 D0GB222JA008 2.2K 1/16W R5808 D0GD222JA017 2.2K 1/10W R6512 D0GB103JA008 1/16W R5809 ERJ6GEYJ331V...
  • Page 135 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R8020 D0GBR00JA008 1/16W R8219 D0GB104JA008 100K 1/16W R8022 D0GB822JA008 8.2K 1/16W R8220 D0GF272JA047 2.7K 1/3W R8023 D0AF680JA039 1/2W R8222 D0GB473JA008 1/16W R8024 D0GB101JA008...
  • Page 136 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R8612 D0GB473JA008 1/16W C131 F2A0J102A247 1000uF 6.3V R8613 D0GB220JA008 1/16W C136 F1H1C105A097 R8614 D0GB220JA008 1/16W C230 F1H1C105A097 R8615 ERJ1TYJ220U C231 F1H1C105A097 R8616 D0GF272JA047...
  • Page 137 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C1119 ECJ1VC1H471J 470pF C2304 F1J1A4750002 4.7uF C1120 ECJ1VC1H471J 470pF C2305 F1H1H332A013 3300pF C1122 F1H1H103A219 0.01uF C2306 F1H1A154A037 0.15uF C1131 F1H1H102A219 1000pF C2307 F1H1C105A097...
  • Page 138 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C3112 F1H1H472A219 4700pF C5898 F1H1H104A013 0.1uF C3113 F1H1E223A047 0.022uF 25V C5899 F2A1A2210063 220uF C3114 F1H1E223A047 0.022uF 25V C6001 F2A1H220A234 22uF C3115 F1H1C104A042 0.1uF...
  • Page 139 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C7052 F1H1H102A219 1000pF C8050 F1K2A105A006 100V C7053 F1H1H104A013 0.1uF C8051 F1K2A105A006 100V C7054 F1H1E105A116 C8052 F1K2A105A006 100V C7055 F1H1E105A116 C8053 F1K2A105A006 100V C7056...
  • Page 140 Safety Ref. Part No. Part Name & Qty Remarks Description C8501 F1J1A106A043 10uF C8502 F1H1H101A230 100pF C8503 F1H1H222A219 2200pF C8504 F1H1H222A219 2200pF C8505 F1H1H102A219 1000pF C8506 F1K1C1060001 10uF C8507 ECQV1H474JL3 0.47uF C8508 F1H1H104A013 0.1uF C8509 F1H1H102A219 1000pF C8510 F1H1H102A219 1000pF C8511 F1J1A106A043 10uF...

Comments to this Manuals

Symbols: 0
Latest comments: