NordicTrack NTSY14016.0 User Manual page 11

Strength System Assembly
4. Orient the Tower Top Cover (2) as shown, and
press it onto the top of the Frame (1).
5. With the help of one or two other persons, move
the strength system near the wall and align
the four Tower Brackets (62) on the strength
system with the two Slide Brackets (60) on the
wall. Tip: To protect the floor or carpet from
damage, place a mat under the strength
system.
Tip: Do not confuse the M10 x 20mm
Patch Screws (101) with the M10 x 25mm
Screws (not shown).
Attach each Tower Bracket (62) to a Slide
Bracket (60) with an M10 x 20mm Patch Screw
(101) and an M10 Star Washer (119); start all
the Patch Screws, and then tighten them.
4
2
5
101
119
62
101
119
62
11
1
60
119
101
62
60
119
101
62