NordicTrack NTSY14016.0 User Manual page 8

1.
WARNING:
could result if the Slide Brackets (60)
or Wall Brackets (61) are improperly
installed. Obtain professional advice
and have a qualified person install the
Slide Brackets or Wall Brackets. Do
not fasten the Slide Brackets or Wall
Brackets to a drywall surface or to a
cinder block surface.
Identify the Slide Brackets (60) and the Wall
Brackets (61).
Using your stud finder, locate the centers of two
wood or metal wall studs. IMPORTANT: Each
Bracket (60, 61) must be fastened to the
center of a wood or metal wall stud. The wall
studs can be no more than 24 in. (61 cm) and
no less than 16 in. (41 cm) apart.
If your wall studs are 16 in. (41 cm) apart,
go to step 2. You will use only the Slide
Brackets (60) to assemble the strength system.
Note: Save the unused Wall Brackets (61) in
case you need to mount the strength system
differently in the future.
If your wall studs are 24 in. (61 cm) apart, go
to step 3. You will use the Slide Brackets (60)
and the Wall Brackets (61).
Serious injury
8
1
60
61