Expansion Card - HP ProDesk 400 G2 Small Form Factor Maintenance And Service Manual

Expansion card

Description
Nvidia NVS310 PCIe x16 graphics card, 512 MB
Nvidia NVS315 PCIe x16 graphics card, 1 GB
AMD Radeon HD8490 DP PCIe x16 graphics card, 1 GB
AMD Radeon HD8450 PCIe x16 graphics card, 1 GB
AMD Radeon HD8350 DH PCIe x16 graphics card, 1 GB DDR3
Intel PRO/1000 single port GbE NIC, includes bracket
Intel 802.11 a/b/g/n + Bluetooth 4.0 Wireless NIC
Intel Dual Band Wireless-N 7260 802.11 a/b/g/n (2x2) Wireless NIC
The computer has three PCI Express x1 expansion slots and one PCI Express x16 expansion slot.
NOTE: The PCI Express slots support only low profile cards.
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 slot.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot
on the back of the computer chassis.
4. Release the slot cover retention latch that secures the slot covers by lifting the green tab on the latch
and rotating the latch to the open position.
5. Before installing an expansion card, remove the expansion slot cover or the existing expansion card.
(Preparation for disassembly on page
(Access panel on page 20).
19).
Expansion card 27