Table of Contents
Advertisement
NOTE:
the expansion card.
a.
If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot
cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the
chassis.
b.
If you are removing a PCI Express x1 card, hold the card at each end, and carefully rock it back and
forth until the connectors pull free from the socket. Pull the expansion card straight up from the
socket (1) then away from the inside of the chassis to release it from the chassis frame (2). Be sure
not to scrape the card against the other components.
28
Chapter 4 Removal and replacement procedures: Small Form Factor
Before removing an installed expansion card, disconnect any cables that may be attached to
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ProDesk 400 G2 Small Form Factor and is the answer not in the manual?
Questions and answers