Mitsubishi Electric FR-A7NP Instruction Manual page 19

(4) For wiring of the FR-A700 series 22K* or less and the FR-F700 series 30K* or less, route wires between
the control circuit terminal block and front cover. If cables can not be routed between the control circuit
terminal block and front cover (approx 7mm), remove a hook of the front cover and use a space become
available.
For wiring of the FR-A700 series 30K* or more and the FR-F700 series 37K* or more, use the space
on the left side of the control circuit terminal block.
0
0
FR-A700 series 22K or less
and FR-F700 series 30K or less
* The inverter type of 22K and 30K of FR-A700 series, 30K and 37K of FR-F700 series in each -NA, -EC versions are as follows.
FR-A700 series 22K
(FR-A720-22K, FR-A740-22K)
FR-A700 series 30K
(FR-A720-30K, FR-A740-30K)
FR-F700 series 30K
(FR-F720-30K, FR-F740-30K)
FR-F700 series 37K
(FR-F720-37K, FR-F740-37K)
Cut off
with a
nipper,
etc.
Cut off a hook on the inverter
front cover side surface.
(Cut off so that no portion is left.)
NA
FR-A720-00900-NA
FR-A740-00440-NA
FR-A720-01150-NA
FR-A740-00570-NA
FR-F720-01250-NA
FR-F740-00620-NA
FR-F720-01540-NA
FR-F740-00770-NA
FR-A700 series 30K or more
and FR-F700 series 37K or more
EC

FR-A740-00620-EC

FR-A740-00770-EC

FR-F740-00620-EC

FR-F740-00770-EC
WIRING
0
0
Control circuit
terminal block
13
3