Mitsubishi Electric FR-PU07 Instruction Manual page 4

Additional Instructions
To prevent injury, damage or product failure, please note the following points:
Transportation and mounting
Do not install and operate the parameter unit (FR-PU07) if it is damaged or has parts missing.
Do not stand or rest heavy objects on this equipment.
Check the inverter mounting orientation is correct.
The parameter unit (FR-PU07) is a precision device. Do not drop it or subject it to impact.
Use the inverter under the following environmental conditions:
Ambient temperature
Ambient humidity
Storage temperature
Ambience
Altitude, vibration
Temperatures applicable for a short time, e.g. in transit.
Test operation and adjustment
Before starting operation, confirm and adjust the parameters. A failure to do so may cause some machines to make unexpected motions.
b
CAUTION
−10 °C to +50 °C (non-freezing)
90 %RH or less (non-condensing)
−20 °C to +65 °C
Indoors (free from corrosive gas, flammable gas, oil mist, dust and dirt)
Max. 1000 m above sea level, 5.9 m/s
b
CAUTION
2
or less (conforms to JIS C 60068-2-6)