Installation Using The Connection Cable - Mitsubishi Electric FR-PU07 Instruction Manual

1.2.2 Installation using the connection cable

Remove the operation panel (FR-DU07).
Securely insert one end of connection cable into the PU connector of the inverter and the other end into the connection connector
of FR-PU07 along the guides until the stoppers are fixed.
Install the operation panel only when the front cover is installed.
REMARKS
For details of the connection cable FR-A5 CBL, refer to the connection cable instruction manual.
Stopper
FR-PU07
b
CAUTION
PRE-OPERATION INSTRUCTIONS
1
7