Selecting The Parameter From User-Set To Change The Set Value - Mitsubishi Electric FR-PU07 Instruction Manual

2.3.4 Selecting the parameter from user-set to change the set value

If a parameter is registered to user-set, the parameter can be read from user-set list and changed. (For registering the user group,
refer to page 26).
Example: When changing 5 s to 180 s as the Pr. 8 "Deceleration
time setting"
Description
Press the PU-key.
The frequency setting screen appears
to switch to PU operation mode.
Press the PrSET-key.
The parameter unit enters the parame-
ter setting mode.
Change the screen using the ▼-key.
Select a User List.
Using the Cursor-keys ▲/▼, point the
cursor to "User List".
Press the READ-key.
The list of the parameters registered to
user-set appears.
Description
Select the parameter.
Display
When moving the cursor using the Cur-
sor-keys ▲/▼ and pressing the READ-
key at "Dec.T1", the current setting val-
Freq Set
SET 0.00Hz ue is called.
‘
Direct setting:
0~400Hz
Press "180".
Enter the desired value.
Or
SETTING MODE
Step setting:
0~9:Ser Pr.NO.
Press the Cursor-keys ▲/▼. Display
"180" using the Cursor-keys ▲/▼.
Select Oper
‘
1 Appl.Grp Press the WRITE-key.
2 Pr.List
The set value is changed.
3 User List
4 Param Copy
Press the SHIFT-key to display the next parameter.
If you entered an incorrect value, press the ESC-key to return to the
1 Appl.Grp
pre-entry state.
2 Pr.List
‘
3 User List
4 Param Copy
8 ‘ Dec.T1
75 RES Mode
FUNCTIONS
Display
8 Dec.T1
5.0s
‘
0~3600s
8 Dec.T1
5.0s
‘ 180s
2
0~3600s
8 Dec.T1
180.0s
‘
Completed
25