Mitsubishi Electric FR-PU07 Instruction Manual page 43

Description
Enter "901" and press the READ-key.
The current Pr. 901 setting appears.
Enter "50" and press the WRITE-key.
The setting of maximum running fre-
quency is complete.
Press the FWD-key.
Forward rotation is performed at 50 Hz.
You need not connect the motor.
Using the Cursor-keys ▲/▼, adjust the
voltage across terminals AM-5 and
press the WRITE-key.
Setting is complete.The output voltage
displayed is the value at 100 % output.
This voltage is not stored if you do not
press the WRITE-key.
Display Description
901 AM Tune
Press the PrSET-key.
Run Inverter
The parameter unit is put in the param-
‘
0.00Hz
eter setting mode.
PU
901 AM Tune
Run Inverter
Enter "158" and press the READ-key.
‘ 50Hz
The current Pr. 158 setting appears.
PU
Enter "2" and press the WRITE-key.
901 AM Tune
The setting of output current is com-
Mntrf 1000
plete. The output current for 10 V DC is
the setting value of Pr. 56 "Current
‘ ‘ <WRITE>PU
monitoring reference" (initial value: rat-
ed inverter output current).
901 AM Tune
Completed
Monitor
FUNCTIONS
Display
SETTING MODE
0~9:Ser Pr.NO.
Select Oper
158 AM Set
21
‘
158 AM set
2
2
Completed
33