Changing Only The It Password - Logicube F-FALCON-SA User Manual

7. Type the following command then press the Enter key:
8. Press the following key combinations to go back to the Graphical User

16.0.3 Changing only the it password

For the username: it
13. Connect a USB keyboard one of the two USB ports in front of the Falcon
14. Once logicube prompt appears, type the following commands, one line
15. The following prompt will appear:
16. Type a new password then press the Enter key. The following prompt
17. Type the new password again then press the Enter key. The following
18. Type the following command then press the Enter key:
19. Press the following key combinations to go back to the Graphical User
Logicube Forensic Falcon™ User's Manual
passwd: password updated successfully
sudo mount -o remount,ro /
Interface: Alt+1
then use the following key combinations: Alt+2 then Alt+Shift+Enter.
at a time (Press the Enter key after each command/line):
sudo mount -o remount,rw /
sudo passwd it
Enter new UNIX password:
will appear:
Enter new UNIX password:
response should appear:
passwd: password updated successfully
sudo mount -o remount,ro /
Interface: Alt+1
CHANGING DEFAULT PASSWORDS
154