Logicube F-FALCON-SA User Manual page 115

NOTE: Here is a close-up screen shot of what the Destination drive will look like
in the Ext2 Volume Manager program. Note the Partition type is set to RAW.
Here is a screen shot of the full Volume Manager window.
4. Double-click the drive. Alternatively, the drive can be highlighted, then
Logicube Forensic Falcon™ User's Manual
from the menu system, go to Tools then Ext2 Volume Management.
The following screen will appear. Make sure that there is a check mark
next to "Automatically mount via Ext2Mgr. Also, make sure there is a
drive letter assigned (to the right of this option). If not, assign an
available drive letter. Click the Apply button.
VIEWING EXT4 IN WINDOWS
106