Decrypting Using Freeotfe - Logicube F-FALCON-SA User Manual

6. The Destination drive should now be accessible in Windows.

8.3.4 Decrypting using FreeOTFE

Requirements:

FreeOTFE properly installed

A drive encrypted by the Falcon using the CBC cipher mode connected to
the computer with FreeOTFE.
1. Open FreeOTFE. In the main window, click File then Linux volume then
Logicube Forensic Falcon™ User's Manual
If the Destination drive was formatted with the EXT4 file
system, and Ext2Fsd is not installed, the following messages
may appear in Windows. Make sure Ext2Fsd is installed if the
Destination drive was formatted with the EXT4 file system.
Mount partition...
DRIVE ENCRYPTION & DECRYPTION
117