Case Verify Settings - Logicube F-FALCON-SA User Manual

Logicube Forensic Falcon™ User's Manual
TYPES OF OPERATIONS
also where to start the hash. By default the
length is set to 100% (whole drive) and the
starting percentage is set to 0% (start of the
drive).
When the Falcon finishes hashing the drive, the
following screen will appear showing the task
completed.
Tap the (Info) icon on the left of the
completed screen to see both the expected
hash value and the computed hash value.

6.0.2.3.2 Case Verify Settings

If Drive Hash mode was chosen, the Hash
Settings screen will appear:
Tap this icon to set which
hash to verify (Primary or
Both).
65