Wipe / Format; Destination - Logicube F-FALCON-SA User Manual

6.0.3 Wipe / Format

There are three selections when performing a wipe: Destination, Settings, and
Case Info.
Logicube Forensic Falcon™ User's Manual
This type of operation allows the user to erase, wipe, and/or
format one or more Destination drives. There are three main
settings: Secure Erase, Wipe Mode, and Format.

Secure Erase – Sends a command to the drive instructing it to
perform a secure erase based on the drive manufacturer's
specifications for the secure erase command.

Wipe Patterns – Allows the user to set a specific pattern to use for
wiping the drive. The number of passes is customizable (up to 7
passes) along with the type of data written for each pass. In
addition, a 7-pass DoD wipe can be set with pre-selected pass
values.

Format – Formats the Destination drive with an EXT4 file system or
NT file system (NTFS) with or without AES-256 encryption.
More information on encryption can be found in
Chapter

6.0.3.1 Destination

A screen will appear, allowing the selection of one or more
destinations. Tap the drive(s) to be erased, wiped, and/or
TYPES OF OPERATIONS
8.
Tap this icon to choose a drive to erase, wipe,
and/or format.
67