Viewing Source Drives Over The Network Using Iscsi; Configuring The Iscsi Initiator - Windows 7, 8, And 8.1 - Logicube F-FALCON-SA User Manual

11.2 Viewing Source drives over the network using iSCSI

An iSCSI initiator must be configured to view the contents of Source drives over a network.
Although there are many iSCSI initiators available, these next sections will discuss configuring
Microsoft's iSCSI initiator in Windows.
11.2.1 Configuring the iSCSI initiator – Windows 7, 8, and 8.1
1. Open the iSCSI initiator. In the Target tab, enter the Falcon's host name
2. The Quick Connect window will appear and any drives connected to the
Logicube Forensic Falcon™ User's Manual
or IP address in the Target field. Click the Quick Connect button to
continue.
Source ports of the Falcon will appear on the list of discovered targets.
Highlight the drive to view, then click Connect.
VIEWING DRIVES OVER NETWORK
133