Ec Declaration Of Conformity - Hitachi wj200 series Quick Reference Manual

EC DECLARATION OF CONFORMITY

We, Hitachi Industrial Equipment Systems Co., Ltd., of
1-1, Higashinarashino 7-chome, Narashino-shi, Chiba 275-8611 Japan
declare under our sole responsibility that: -
the Hitachi Sanki WJ200 series of Inverter Drivers which consists of 27 models ranging from motor
capacity 0.1kW to 15kW with the exact designated model numbers for the WJ200 series detailed as
follows.
WJ200-(I)(II)(III)(IV)
(I)= 001, 002, 004, 007, 015, 022, 030, 037, 040, 055, 075, 110 or 150
(II) = S, L or H
(III) = F (product is provided with keypad)
(IV) = blank
Serial number / (s) / range......................(not necessary for the user manual copy of DoC)
conforms to applicable Essential Health and Safety Requirements of the EU Machinery Directive
(2006/42/EC) and the Protection Requirements of the EU EMC Directive
2016], 2014/30/EU [from April 20th 2016])
The name and address of the person authorized to compile the technical file, established in the
Community is: -
Hitachi Europe GmbH
Am Seestern 18, D-40547 Duesseldorf, Germany.
An EC Type Examination Certificate (Nr. 01/205/0699/09) has been issued by Notified Body (0035) under
the EU Machinery Directive by TUV Rheinland Industrie Services GmbH of Alboinstr, 58 12103 Berlin
Germany.
Harmonised standards used to support this Declaration of Conformity, as referred to in
Article 7(2), include: -
Harmonised standards forming the basis of conformity for the EU Machinery Directive
EN 61800-5-2: 2007
EN ISO 13849-1: 2008 + AC: 2009
EN 61800-5-1: 2007
EN 62061: 2005 + AC: 2010 + A1: 2013
EN 60204-1: 2006 + A1: 2009 + AC: 2010
Harmonised standards forming the basis of conformity for the EU EMC Directive
EN 61800-3: 2004 + A1: 2012
Relevant Standards
IEC 61508 Parts 1-7: 2010
Place and date of the declaration:-
(left blank for DoC on user manual)
Identity and signature of the person empowered to draw up the declaration on
behalf of the manufacturer
(left blank for DoC on user manual)
(which stands for the applicable motor capacity in kW)
(S=single phase 200V power system;
L=3 phases 200V power system,
H=3 phases 400V power system)
(These model numbers appear on the respective labels of these drives)
.
114
(2004/108/EC [until April 19th